Search results

ProTec Pipe SOLD Sent from my iPhone using Tapatalk

Yamaha: Ada coupler set (7.5/10) - $50 SJ Midshaft Rebuilt and never ran (9.5/10) - $240 ProTec Mach 1 Exhaust (7/10) - $SOLD Kawasaki: 148mm Skat Trak Swirl 13/18 prop (9.75/10) - $175 148mm Kawi Pump (Very dirty but bearing feel smooth) – $PM Me Dual 40mm CDK2 II & stock FA (7.5/10) - $125...

** This is the post I used to help with my electric issues. Mine ended up being a broke wire under one of the rubber boots the leads into the e-box*** You really need a multimeter to diagnose it correctly. If you are not even getting a click when you hit the button, then try the simple things...

Not my post but follow these steps for diagnosing the problem. You really need a multimeter to diagnose it correctly. If you are not even getting a click when you hit the button, then try the simple things first before you tear anything apart. All these should be true in this order: -12v at...

I have a 701 SN i rebuilt over the winter and i'm looking to get some advice on where to start for carb tuning. Engine is 61x case/62t cylinder bored out to 83mm with stock head, single 44mm carb, and black pro-tec pipe. I have no idea what this carb currently has in it for jets(Bought the motor...

Haha finally reading through here and this one is great!(I needed my 5th post so I can go spending money!!!)

Get a worx 201 intake grate and run stock plate and prop for now. It's all personal opinion on what people like to run. My advice is pick something up used and try it out.. if you don't like it sell it and try something else that's fits to how you ride. And also don't be lazy. You said it...

This is my first stand up and I was going to reprint the stock pole(the yellow is ugly). I noticed it was cracked at the bottom. This is more or less just a temporary fix until I have the spending cash for a AM pole. So in the mean time I had the materials to fix and decided I would share how...

Sounds like you have covered most of it.. Double check carbs again, Pop-offs and your jetting. Have heard of people cleaning their tanks and some left over debris getting into the carbs and causing issues. Better to check again and rule that problem out. After that all I could say is maybe a...

There are no pissers on a 91 650. Only time you would T (I would use a Y) into the line would be to install a flush kit. If you really feel like it's not cooling properly you probably have a lot of build up inside from it not being flushed. If It seems like a serious problem you should replace...