Search results

I have no need bought a track bike has stock system and this one came with it no scratches no dents pretty much new was looking to get 400 or make offer came off 05 crf 250 r Pm for more info

That has been done and is easer to fiberglass cause it's all flat http://www.x-h2o.com/index.php?threads/flat-deck-550.109626/ Here is a link to a build here on the x

Here is before I cut it and after

Thanks. ill see if i can post some more pics i de turfed the hull and started measuring it all out then grabbed a saw and started cutting . as far as fiberglass goes its not rocket science id recommend going down to home depot buying fiberglass mat and resin and start playing with the stuff ...

I did not do foot holds but cutting the tray and making it wider was the reason for my fire extinguisher re location

mine fits right on top of the fuel tank fits perfect

i put 135 high jet and 105 low 1.5 out on each screw 18-20 pop off silver spring (i think ) jet sport hc head and a coffmans 1/2 pipe no timing advance at 0 stock bore stock porting and it runs really well no bogging and crisp my mine is 550 piston port motor

im in hayward have 3 of them

Holly cow I can not believe it fuel selector thank you

ok will try that do the selector switches go bad ? this is something i have never heard of

hey guys i have a 92 sj 650 bought used off a hack of a mechanic i. took it to the water and ran great had a weird interminit issue only happend twice over the 10 gallons of gas i ran through it @ wot the ski would feel like it lost fuel and sputter out i would float there for about 60 seconds...

Ok so drill out the existing one now.?

Hi every one i am building a SN and two of the ride plate inserts have bolts broke off in them i have tried easy out with no luck . I am glassing foot holds in the ski so i cut the tray out and dug the foam out it looks like they press in from the top and get glued into place . Can i get new...