Search results

I ended up going to my local paint supply shop and using PPG plastic prep system. I did everything last night and it successfully bonded to the seat base. I took one extra step than PPG said on the instructions and I used a Scotch pad to remove all the mold release. It allows you to paint the...

How did you prep your plastic? I only cleaned with acetone Sent from my XT1254 using Tapatalk

Wish I would have read this post before I paint my seat base. I used Valspar color radiance paint + primer for wood metal wicker plastic and more. I am having the same problem. If I scratch lightly with my nail it comes off. It looks like the appliance epoxy only comes in black or white. I need...

Thanks for your help and info Sent from my XT1254 using Tapatalk

I know some spray glues can dissolve foam. What did you use? I picked up a spray can of 3M outdoor contact cement. I'm guessing it is the same as the liquid form of contact cement. The can said it would hold up to heat and water but it didn't say anything about material compatibility. Wasn't...

How exactly did you do your seat cover? My old cover is not form fitted to the foam and looks sloppy. I had JetTrim make a seat cover but they said to stretch the new cover over the old cover. I don't see how that is going to work and look good. When I told them my old cover wasn't tight to the...

Thanks Sent from my XT1254 using Tapatalk

Im trying to remove both of my side mats what is the trick to remove them? I looked in my service manual and it says to use epoxy if installing a new one. Hope it isn't epoxy. I don't want to damage the gelcoat around them Sent from my XT1254 using Tapatalk

Yeah I also had read about the hook getting ripped out. The curve and along the top and cutting out the bulge where the pocket for the hook goes in towards the engine compartment seems like it will be alot of work to match the angles. I just don't want to damage my glass. Thanks for the info...

What did you do to reinforce this and do you plan on pulling anything? I am looking to pull a tube and what to know what people are doing so it will be strong enough for that. Sent from my XT1254 using Tapatalk