Search results

SOLD Sent from my iPhone using Tapatalk

Round nose pole, rivets drilled to be shorted but I have not cut it shorter yet. Also comes with the hazard aluminum bracket to mount the round nose pole on a square nose. I’m a tall guy and bought this for a square nose build I did, but never got around to changing out the pole and sold the...

Survey says........ bad starter roller bearing. I had to pretty much pull the damn engine to get the stater out. Does anyone rebuild these? I think just the front roller bearing are bad; other wise it looks good. Sent from my iPhone using Tapatalk

Battery voltage is good. Any other ideas? How do I get the starter off without pulling the motor? Sent from my iPhone using Tapatalk

Plugs are out and she turns over easily by hand. It was freshwater Sent from my iPhone using Tapatalk

Had a blast last weekend ripping around lake of the ozzarks, but my weekend ended when my ski started filling up with water. She seemed to be sitting a bit low so I put the bilge on, and was surprised how much water was coming out, especially since I put an epic scupper to help drain the...

Thanks for everyone's help. I ended up finding a RN pole on eBay for $200. Looks like I just need a hazard bracket or similar before the spring. I will keep my eyes peeled Sent from my iPhone using Tapatalk

4-5" minimum Sent from my iPhone using Tapatalk

How does that work? Sent from my iPhone using Tapatalk

I finished my SN rebuild last summer, and really need to get a shorter pole. I'm 6'3" 240 and the stock one is way to long. I find my self putting the bars right up against my hips to even plane and not bob around. I know there a tons of very high quality aftermarket options, but those are...

It comes out very shiny, some people may elect to let it cure, wet sand it and then buff it out. However this is not really a show ski, lol. There are some very light imperfections, but white is the most forgiving color to paint, which is also why I choose it. I used a high end HVLP gun system...

Thanks, yeah the decals were a little tricky, but not too bad if you take your time. Not perfect but it looks wayyyyy better than what I started with. Here is the paint I used. It was basically the cheapest single stage urethane I could find locally. The primer was pretty poopty and would...

I thought I would post a follow up since I finally got around to putting the decals on this old girl. I am very happy with how it turned out, but I think I want another project for next summer (: Sent from my iPhone using Tapatalk

I finally finished my 1991 superjet 650. Nothing changed on ski except; intake grate, scupper, bilge, new fuel filter, new plugs, new foam, new foot holds and paint. I took it out for the first time since I bought it and rode it for about an hour or so, fell off a bunch but overall it ran...

I recovered my chin pad, got some new bars, primer kit installed and a new work grate. All that is left of the turf Sent from my iPhone using Tapatalk

Getting a little closer Sent from my iPhone using Tapatalk

Yeah, that was my plan but I actually want some 2015 superjet graphics instead Sent from my iPhone using Tapatalk

I got the primer down, and the first coat of paint down Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Long time no update. I was out in Thailand for a month or so and finally or back to work on the ski Sent from my iPhone using Tapatalk