Made a 360° Gopro helmet mount. Used a couple pieces of aluminum tubing from Home Depot and a small caster. I tapped one end for the bolt with the washers and on the other end I cut the head off a bolt to screw the 2 pieces together to get the length I wanted. Found a aluminum GoPro tripod mount...
There wasn’t enough clearance on the bottom of the flowguard to run the steering nozzle bolts XScream supplied. I took a couple socket cap bolts and turned the heads down to fit inside of the holes of the nozzle. I don’t have a lathe so I had to do it the poor mans way.
Sent from my...
All welded up thanks to @Yami-Rider. Should work great. Only thing I could possibly see that might be an issue is the hight of the trim arm. It isn’t really any higher that the top of the flowguard and it still had some room before it touches the hull when I bolted it on @yami-riders fv pro but...
I assume so. It would keep any water from entering from the back or escaping if there is any blow by from the nozzle. It’s just what it said to do in hiro’s video.
How much it actually helps idk. If you look at the revolver hulls they have a flowguard that is built in to the design and part of...
I watched Hiro’s youtube video on installing the Rrp flowguard. It was pretty straight forward. I was disappointed with the screws they supplied with the kit. Instead of using their flat Philips I picked up some stainless flat head allens.
Dropping in chopped glass and pouring in resin was the...
Worked on getting the rrp flowguard mounted and seeing what it will take to get it to work with my existing trim setup.
Ended up having to cut the steering arm off the nozzle and arm off the trim ring. All I need to do to the nozzle is have the steering arm welded back on up a little...
@tricky1 sent me the rendering of my graphics that @Lm12 did. It’s looking awesome. Just got to change that 900 to 1200
I also got a teaser pic of my cylinder from @tntsuperjet
Sent from my iPhone using Tapatalk
I decided to sell both my Tigercraft V2 and my XScream Dvx this year and start off fresh in 2018 with new builds.
I hit up Taylor Curtis and talked to him for a long time about that I wanted out of my next hull. I ended up deciding on the xfr. I did want a super heavy hull and didn’t want to...
Didn’t know you were doing a building thread. Looking good. I call bs on the having a hard time finding a used Dvx hull :-p
Sent from my iPhone using Tapatalk
First wave of parts for the new xfr came in. Pain pills and PayPal isn’t the greatest combination. I’ve been stuck inside for the last few weeks just spending money and parts shopping. Anyone familiar with atp flame ts2 [emoji91]?
Sent from my iPhone using Tapatalk
Before this one I had a short straight piece off the water box to a aluminum 45 and then another straight piece to the back of the ski. Worked ok just was a lot of unnecessary clamps and connections. When I put in my 1200 the intake mani would hit one of the tbolts when my motor moved forward...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.