Search results

I added rear exhaust to my X2 without cutting anything. I simply used a hole saw on the inside and outside. I used a piece of aluminum pipe for my exhaust longer than I needed and cut teeth into it. I then used the exhaust pipe to cut the foam out, cut the teeth off when I was done. You can do...

I might have agreed with you but after hurting my back on my Superjet I no longer do. Even the SXR is too narrow for a proper stance. Footholds, in certain circumstances (ride style, rider size) can improve upon the ergonomics of the SXR (definitely the superjet) by widening the stance which...

Sometimes cast ride plates fit a little poorly. Their shape allows them to flex slightly. Sometimes it is important to tighten the bolts down like a manifold so the ride plate drops in evenly and without warpage. Could just be the lighting in the picture but there is a lot of light on the right...

And done. I definitely had more important things to do but damn a good show.

I am enjoying this show. Good tip.

And don't you worry. His fiberglass is wetter than his humor.

https://impros.com/store/index.php/tech-info/solas-impeller-application-charts/impros-solas-impeller-recommendation-chart-for-1977-2013-kawasaki-watercraft.html

Which motors?

Right now we are racing power wheels. Right now we are riding stock but the fastest cars go up to 16mph. Look up Toddlerdega on FB.

Way too expensive for the kid, but man, you'd have the coolest kid on the block if it's in your budget. https://tampa.craigslist.org/hil/tls/d/tampa-snap-on-dealer-award-1-5-scale/6963134399.html

You can buy RRP hardware and modify the tray yourself. Adjustable footholds often have a piece of about 1" think marine composite board installed between the inner and outer gunnel so they the hardware tightening and other related forces do not crush the hull or allow leakage. I do not know were...

Not mine but looks legit. Pretty impressive. https://tampa.craigslist.org/hil/boa/d/odessa-kawasaki-jetski-7500ss-brand-new/6959921397.html

Terrible advice. This... Do this!

If they are superficial in the gelcoat then they are fine, just cosmetic. If they are structural damage to the glass then they can worsen and should be repaired.

Sidebar since water in the fuel was mentioned... I used to run 93 octane with ethanol (ADA head with compression. I was progressively displeased with the performance of my ski. I cleaned my carbs many times and tried many other things and was never happy like I was when it was first setup. The...

I know my X2 has filters on the pickups. I can't recall if the stock superjet has them but I would speculate it does. Yes they get clogged. If you are holding it WOT, and you think it is running lean, and it is shutting down at WOT, you might be seizing the motor. You should stop holding it WOT...

Front exhaust sucks. I own an X2 and their is nothing positive about front exhaust in my opinion.

Do you have a line coming off the back of your head? I was struggling to understand your cooling but I realize now you have an aftermarket hull and your pissers are at the front of the tray. There is a similar conversation going on in this thread...

I would have some serious doubts about the ability to clean and prep the surface sufficiently enough to ensure a proper repair with the amount of oil that builds up on the inside of the pipe. Not to say it's not worth a try. You can definitely repair it from the outside. Pipe builders (I think...