Search results

It's reasonable especially if it's clean and a 96

I'm in $ sent

I was saying a glass one is 4 k mine sadly was much more but they ride the same emilys is glass white gel coat

4k Glass hull vacuum bagged w resin infusion black or white this is my hull

No but he will soon he's better with composites than computers lol

Is your reduction nozzle bored? If you're looking for more bottom end you'll probably want a lower pitch like 7/14 or something similar call or email impros

You need to grind down a wrench and you can loosen them

I've got to ride the fix on multiple occasion rides good looks good and would highly recommend it to anyone looking for a fixed steer

Good non buy

Agreed I'll be running this system in the boat I'm building for my wife and currently running in mine

It would be lean only if the leak was between the intake and carbs any other leak will cause the motor to run rich crank seal base gasket ect good luck hopefully it's a easy fix

A pop off Guage will only check the psi need to open your needle and seat a leak down check is when you plug your intake and exhaust with whatever you want I use plumbing plugs from home Depot then with a pump you pump up pressure in your cases to 8 psi if your motor doesn't hold the 8 psi...

You probably have a air leak in your motor preform a leak down test if you're not able to hold around 8 psi for at least 10 minutes you need to reseal your motor I'd guess you won't pass the leak down

If you're concerned with your fuel delivery being insufficient put a jet in your return line to build more pressure

I'm building my wife a 1107 monster with all the trimmings to much? just also remember to take out a huge life ins policy lol

Don't have any kids they are expensive and they are not as fun to ride around the lake on

There is always a little more to get or I'm just impossible to satisfy lol

And then the fun part, tuning

0 to 2 turns out is the adjustment range for each jet size if you're 135 with 2 turns out you should try 137.5 if you're closed try a 132.5

It will all align better than a stock one