Search results

Thank you. I would also like to see what kevbo would come up with. It sounds like his formula is an exponential function.

What will be the net octane of different ratios? (Gallons, based on the filling of a 5 gallon gas jug) 91 Pump : 100 AV 4 : 1 3 : 1 2 : 1 1 : 1 1 : 2 1 : 3 1 : 4

50/50 mix no good for raising octane rating?

91 / AV100 50 / 50 mix

i like the x because i can come on here and it puts me in the jet ski state of mind. when im grinding out countless hours of work, school, and daily bs i sneak over to the x and remind myself that sunday is almost here and heaven does exist - even if it is filled with a bunch of a.holes. we've...

tune your bpipe

buy a 61x sitdown, flop the motor into your sj hull, sell it, then buy your am hull and a bunch of new components to go with it

havasu

I did all of that upon initial assembly (to the best of my ability). I just now pulled the pump out and did it clouse's way. ended up removing the thick shim and keeping the thin shim on each side. turned very freely without any hint of obstruction. did notice that my dampner needs to be...

so your saying to put in the front bolts then fill the gaps in the rear with shims?

it feels like rubbing the wear ring, but i wont know for sure until i pull it out tonight and try one of my others. so for the alignment... I followed the details poster here in the faq section. kept addign shims in the back until the driveshaft was centered at the bulkhead. I ended up with...

so my pump will make a rubbing/scraping sound sometimes when i turn the coupler by hand. last weekend i was floating down the river and hit the starter and the motor was locked up. pulled it on the beach and saw that the motor was fine but the prop was sticking. its a recently installed hooker...

It will be premixed. I am asking is if it will be ok to run it without a block off plate for the day (pump still on the cover just not hooked up). Water intrusion to fly / stator?

scored an old wave raider off craigslist. pulled the oil tank and disconnected all the oil pump lines. used premix to get it fired up and sucking fuel. heading out to the water to test er out tomorrow. can i leave the oil pump attached to fly cover, but not hooked up?

move to California asap

mods and tweaks are endless. just ride the dang thing. people have done more with less

sounds like a carbon 550sx hull to me

Ive never run one on any of my 750s. I think it might save you a little effort and energy on long rides

thanks for the response I will run the battery eyelet to the ground post in the ebox. edit: it fired, muchos gracias

There are 4 wires that come from the stator cover , white, brown , black, black. The white and brown color coordinate with the cdi unit. Im partial to thinking the two blacks are both grounds. one of them runs into the ebox and on to the ground post that is giving me a positive reading. The...