Search results

Have question, if I want to remove head - to check pistons etc, and after check everything looks fine, it is just to take it together again, or is necesary to change gasket, or and some lubricants or something when it put back? Thank you

OK, my preassure is low... I understand. What procedure should I choose next?

Did you mean one more check with another gauge? Other type or so? I found some vids and on one have spark in and than meassure, in other both sparks are out. I was measuring With spark plug in... Thanx for help

Hello, Today I measured preasure. Both have 95 PSi, insert new NGK BR8ES spark plugs, check fuel tank if there is no some dirt, or stuff. Ask the first owner if was rejet carbs - he said yes, they was modified. Tomorrow wanna try on water with fresh water. Hopeeverything will be fine, and my...

Hello, Today I measured preasure. Both have 95 PSi, insert new NGK BR8ES spark plugs, check fuel tank if there is no some dirt, or stuff. Ask the first owner if was rejet carbs - he said yes, they was modified. Tomorrow wanna try on water with fresh water. Hope everything will be fine, and...

Yes I did. Must try preassure first, but here in Slovakia is 23:00 now, and can't go to try it now ;-) And thanx

Thanx, maybe it was done, but I'm the second owner and don't know, what have been done. Ok, how can I check it?

Tomorrow try to measure the preassure on engine. I hope I will fix it, because I dont remember how much of gas I had today in tank when it happend. Try preassure, and if they be good fill up tank and full gas

No I didn't rejetting, got wet pipe.

Hello, I would like to know, what could be problem on my KAWI SXR 800 /factory wet pipe, flame arrestors/ When I'm run full speed for maybe 15-20 sec, the engine slow down and turn off. After that, I start normally, repeat it and had same issue. Petrol is 2 weeks old, half of tank. Today it was...

@aqualocos do you have expriences with how to remove the tank? It is necessary to remome or move engine? Cant move the tank because of the exaust - wet factory pipe... Can you help me?

Ok, thanks for the reply. I will just cut tubes in waterbox and drill holes. Is that right? Thanks for answers!

Today somebody told me better way to mod the waterbox, is not drilling the holes, just put everything out from there... What do you think?

Hello Jetrace19, can you help me with "how to mod" of stock waterbox on my sxr?

Thank you for goodwill.

Great!:)

Saw this video today ;) Good sound. Ok, just for recap :D: cut waterbox, drill five holes 14mm and then weld it together again... Do you have some more pictures?

Thanx

If I loose just little bit of speed/power that is no reason why don't do it... It is funny here on forum is two "camps" of people - some of them is for mod and the second half don't. Maybe I try it through weekend if have enough time and then can write results. Now I must figure how to take...

Thanks MTRHEAD. And what do you think about aftermarket waterboxes? Like ATP?