Search results

Those are quite fancy!! Mine is way more quick and dirty. Came out nice though. A bit flimsy but should be fine once I turf it

I stole the idea from a pro rider. Don’t think they are too common because of the hassle of always having to slide it u see the ski

I went for it. I’m doing Just one layer to be safe but seems fine so far. Thanks all

Hey All, I'm about to start the build of my new Rickter XFS G2. My first step is to build a bottom protector plate thingy. Ya know, a fiberglass plate that i turf and bring with me everywhere that goes between the ski and my stand or trailer bunks to keep the bottom in perfect condition. To...

If you are adding in 10 degrees of timing, expect to play with fueling a bit. also, expect it to run much better down low.

How far did it discharge? You may have destroyed the battery. Start unplugging stuff until it doesn’t spark as big. Definitely measure the draw and unplug stuff until it goes down. Bilge pump? Those are usually suspect. Could be cut/grounded wire in stator. Could be cut/grounded wire to start...

Is it possible you had the lanyard hooked on all winter? I think the zeel stays powered if the lanyard is hooked up and that would certainly shorten that regulators life.

Enhancer advanced 3.5 degrees probably gave u 28ish degrees advance starting at 1k rpm or so. Probably more than You have now below 3k if you are running the off the shelf wax curve. Just sayin’

Check the zeel curve. Make sure you have all the timing in by like 1800. Wax curve brings timing in pretty late and makes bottom feel a little laggy.

I agree. I ran a 7/14 with a 781 and stock 155 in a havoc. It was perfect. Something is off. A loose pump (your previous setup) could mask tuning issues.

Yup that would do it. If you can get to the pins test for battery voltage on input side and +5v on the output side.

Ya it really is. It’s gotta be in the +5v voltage regulation circuit. I’d imagine the CDI circuit is independent and the IC that is the “brain” of the unit can be powered by the programmer or a 5v circuit powered by the battery and that’s why it works when plugged into The programmer.

i'd just make sure you have 12v to the zeel. Seems like you may not.

eh nvm thats using AC current from an alternator.

Sorta related interesting read. Would be interesting to build my own CDI circuit and drive it with speeduino/etc https://www.homemade-circuits.com/universal-multi-spark-enhanced-cdi/amp/

Ya you are correct but I think these AEM style coils will solve that https://blog.racedom.com/aem-high-output-igbt-inductive-smart-coil/

That’s a pretty general statement. There’s lots of automotive ignitions that could work, sure. My concept could work with sny automotive ECU also but speeduino is simply a cheap one to test the concept with.

I don’t think wasted spark is causing any loss The coils I’m talking about using aren’t standard automotive coils. They are “smart” coils. This means the driver is built into the coil. Essentially, the circuit that does the capacitive discharge is in the coil body, not the ignition control...

Hey All, I've become mildly obsessed with ignition control recently... I've always hated MSD TL as its antiquated and unreliable. Zeel is fantastic and I've used it on all my setups so far. Every back-to-back test so far has shown almost no performance difference but recent testing on my TPE...

My dvx will be for sale In a couple months (new rickter is on the slow boat). It’s ant burgesses WF boat. Wanted to sell it complete though