Search results

I cut off the bottom of the original stem and had it press fit onto stainless tube that is the right size for a bike stem. I'm thinking i'll weld it at the joint and see how it does this summer

i have not cc'd a head but the few 760 engines i've assembled had way too much squish clearance with ADA heads, it made me wonder if the heads got shallower from 61/62 to 64.

in short, it will leak. the very few skis i've torn into i've seen leaks from every place you'd expect and more. if you mount the yamaha drains then you have the option of either running the drain plug or a versa plug.

RIP 640..

there are systems that use the oem bushings - KP is one.

what about the kawi 650 templates :D

it is a 08+ pole so I need to relocate the cable mount anyway, I figured the extra 20mm or whatever for the low setup would not be a problem while I'm at it. Now I'm considering running the higher setup to get the bars up higher and fit the pad correctly.

Ordered monday night, received thursday morning :D I'm quite happy with how it fits and how soft it is, after a friend ate a rrp pole hard this year I was considering cutting up a yoga block for the freeride ski i'm building but this is WAAAAAY better than that would have turned out. The pad...

Just put in a order for the pad, can't wait to get it!

Yup that is exactly it. glad i didn't have to resort to mspaint!

I've seen some sn hoods trimmed on the inside corner to let more air in, it looks pretty good and a bit more subtle.

I figured 3 would keep the dnr off my back for awhile.

so what, you are not gonna run a chinpad?

The first project for my tig welder, a decent shop stand with a removable engine cradle to get one more motor off the garage floor.

poop just got real son! good thing nube is out of the scene so we can have a fair fight.

Anybody have a wetjet fuel pump cover for sale? asking for a friend.

Can't wait to see more of this build!! :D

I encountered this as well and will be checking b-pipes for this from now on. What I ended up doing was porting the manifold first, bolting the two together, then misting some spray paint through the manifold toward the headpipe to leave a witness mark. mine was also bais toward the PTO side -...

If you are not able to find anybody else I can do it. Basically I mark it out off of JM's big bore gasket, cut out the manifold on the lathe (i own a lathe, so i pretty much have to do it that way...) then blend by hand for the manifold and headpipe. I'm no porting expert, I basically try to...

Most trixstars I know of (including mine) have a 155, my assumption is you would just have to put in a 155 pump shoe.