Part Out ✴ Yamaha and Kawasaki OEM factory bolts,nuts, all SS hardware up the wazoo here. LMK what you need!

[SUPERJET-113]

I have a ton of YAM, KAW, and Seapoo-poo stainless OEM bolts, nuts, washers, etc. from parting out a ton of PWC's back in the day when they were plentiful..lol

I can make case bolt kits, cylinder bolt kits, exhaust bolt kits, stator bolt kits, etc. Also have flywheel bolts, long pump bolts, etc. . Also have all the other odd hardware too, just ask. Plus I used to work at the Kawasaki factory in Lincoln, NE and have a butt load of NEW Kawi bolts of all sizes with the green loctite.
Thanks!

 

[SUPERJET-113]

BUMP! Have TONS of ALL different hardware from Yamaha, Kawasaki, and Sea-poo PWC. Just ask, must go!

Hinges, strap clips, hood latch's, seat latch's, rubber straps of all lengths, bushings, EVERY nut and bolt imaginable, case bolt kits, complete bolt kits, long pump bolts, shims - ALL OEM!

 

[Quinc]

Do you have a waveblaster hood latch?

 

[gsxral1000]

Do you have a waveblaster hood latch?

i do

 

[SteveC]

The hull/pole-bracket side hood hooks (not hood side forks) from a SN… I need those.

 

[SUPERJET-113]

The hull/pole-bracket side hood hooks (not hood side forks) from a SN… I need those.

No, sorry Steve.

 

[SUPERJET-113]

Do you have a waveblaster hood latch?

Yes, both latch pieces - hull and hood

B1 hull and hood latch - SOLD!

 

[ErieOne]

Do you have the screws for a waveblaster 1 hood hinge?


Sent from my iPhone using Tapatalk

 

[SUPERJET-113]

Do you have the screws for a waveblaster 1 hood hinge?


Sent from my iPhone using Tapatalk

Probably, but I dont remember what they look like. Ive had like 5 Blaster 1's 95 and 96(not to part out) in the past but never dealt with the hood bolts. Have any pics or screw/bolt size/length?

 

[WFO Speedracer]

I need a couple of cylinder nut,exhaust nut kits for 750 Kawis

 

[ErieOne]

Probably, but I dont remember what they look like. Ive had like 5 Blaster 1's 95 and 96(not to part out) in the past but never dealt with the hood bolts. Have any pics or screw/bolt size/length?

Thx yes here's a pic....I need the screw in the middle which is missing on both sides. Would take several if you have them. Thanks!

Sent from my iPhone using Tapatalk

 

[ErieOne]

Bump


Sent from my iPhone using Tapatalk

 

[CJSHAW636]

Got an oem pole damper pad off a round nose by chance? Hood extinguisher strap wraps around it

 

[SUPERJET-113]

Got an oem pole damper pad off a round nose by chance? Hood extinguisher strap wraps around itView attachment 427300

Nope, sorry.

 

[Sanoman]

Looking for a set of yamaha bolts for the motor mount braces that attach them to the bottom of the engine

 

[jetpilot36]

Hello. Do you have a yamaha ebox? for sj?

 

[SUPERJET-113]

Looking for a set of yamaha bolts for the motor mount braces that attach them to the bottom of the engine

Yes, I do. Give me a bit of time and I'll post up today.

 

[SUPERJET-113]

Hello. Do you have a yamaha ebox? for sj?

Yes, I do. It's complete except for a CDI. But are you just looking for the box itself?

 

[Sanoman]

Yes, I do. Give me a bit of time and I'll post up today.

Found the bolts in my vast collection of junk ski parts.So l’m good

 

[SUPERJET-113]

I need a couple of cylinder nut,exhaust nut kits for 750 Kawis

I used to have a butt load of these of the 550 type and 650/750 type, but I have used most all of them up in the past years. I just have maybe like 10 or so left last time I looked.