08 Superjet Updates

[Bboy701]

Alright! I'm back after a complete loss of motivation to get this thing finished. I broke out the dirtbike a couple weeks ago and ended up getting preoccupied with that. Yesterday I pulled 14 hours straight of working on it to finally get it running. I powdercoated the chamber, trim ring, headpipe and my miscellaneous trim brackets that I built for C.A.T.S. Later today I'm planning on cleaning it up and tying off loose ends, I'll take some better pictures then and post them up. But as of now, here it is all assembled.

 

[Bboy701]

Final post, as she is finally 100% functional and dialed from what I can tell so far. Got the last loose ends dealt with today, which consisted of moving my steering joint out to the furthest hole on my turnplate to get all the throw I possibly can with the steering. I also loosened up the pole since I cranked it last summer. As I'm writing this I realize that it needs to be tighter for no handers. Finally tore out the stupid blowsion FCV, which was assembled backwards internally so all of last summer my stinger was 100% dry. I replaced the FCV with a restrictor I luckily had laying around. Hopefully i'll tear the graphics off at some point this summer then get it painted. I would tear them off right now, but the gelcoat is absolutely thrashed underneath due to it being crashed into by a semi and then sliding across the freeway for about 100 yards. But anyways, the build is completely done and after a test ride the thing rips. Gonna be a good summer!!!

 

[Bboy701]

One last thing, I have built this ski up over the course of about 2 years and I couldn't be happier with how it is now. All of this was done on a 17 year olds budget, which may as well be nothing. Here's the spec sheet which is the wrap for this build. I appreciate all of you who have actually read this far!

Trinity Spec Sheet

Blowsion 1 Piece Girdled Head-37cc domes
.5 Over Bore Decked 61X Cylinders @ 185 PSI
ProX Pistons
62T Bottom End
Stock 38’s
Stock Electronics
Blowsion Tornados
MSD Plug Boots
Factory B-Pipe Mod chamber
Pro Series Flow Control Valve
ProTec Trim Cable
Jet Maniac “Big Bore” Throttle Cable
Jet Maniac 96-07 steering cable
Jet Maniac Steering Conversion Plate
Blowsion 0 Degree Bars
Blowsion Throttle+Trim Levers
Blowsion Mat Kit
Kicker Footholds
ProTec +20mm Steering Nozzle
Jet Dynamics Top Loader
Jet Dynamics Concave Ride Plate
Blowsion Pump Cone
Blowsion 2008+ Destroyers
Pole Rope
Blowsion Pole Spring
Dual Cooling
Hot feet
Recessed Dash W/ Primer and Bilge Switch
GET C1 Hour Meter
Bling:
2 Blowsion 45 Degree Pissers
2 Blowsion 90 Degree Pissers (hot feet)
Blowsion Bow Eyes
Blowsion Exhaust Flange
Blowsion Lock Rings
Blowsion Fuel Select Knob