1200 blaster won't start

[krawler98]

Blaster 1 with gp1200 motor and electronics. Riding today, went down hard and then wouldn't start after that. Start stop switch is new and so is battery. Cables and connections are good. Not even making a click when I press start button. Any help is appreciated. Thanks!


Sent from my iPhone using Tapatalk

 

[TheBuzzard]

broke/shorted the battery out internally. try and jump it. if it doesnt click, that means the starter solenoid isnt getting power/working.
broken battery cable.
disconnect the start/stop at the plug in and jump it manually.
starter solenoid is bad/ open the box and jump/check it.

 

[krawler98]

Checked the battery, it's fine. I'll pull the ebox out and open it up and see what I can find


Sent from my iPhone using Tapatalk

 

[Superjetjim]

Yeah like already said, it'll be either solonoid gone, earth lead gone, or (most likely) corrosion on brown/red or black/white connector to start stop switch (those OEM plugs) unplug them and clean with a Neddle file/carb cleaner then regrease.

 

[DAG]

Unplugs the stop harness and try again

 

[krawler98]

Fixed it. Fuse was blown of all things. Not just blown, but shattered inside of fuse case, crazy


Sent from my iPhone using Tapatalk