New 155/160 "mag" style pump $1000

Sasquachcrap

Sasquachcrap

Location
North Carolina
It has been my goal as of late to figure out how to produce a pump that was a great performer at a fraction of the cost of the big name pumps. I believe I have done it. It's a modified 160 that Yamaha uses on there new four strokes. This is a new pump housing modified by me, new bearings, seals and custom cut drive shaft. (To correct the spline engagement issue common with 155 pumps). It requires the use of a blaster 2 155 wear ring and 155 nozzle. The beauty of this setup is that its actually a 160 but all the 155 stuff works on it. Soon I hope to have 160 wear ring available. All you will have to do is change out the wear ring and prop.

I have tested 2 variations of this setup and have had had no issues.

If anyone is looking for amazing performance at a fraction of the cost look no further.

It is an all aluminum cast eight vein large hub (75mm) stator.

Price includes every thing pictured


Plus Paypal and shipping

a9f2c2fd710d8150f1c918c39a263960.jpg
abcd23800edcc23f9c5893327d2c8128.jpg
ed2bccb4a5ac6008e62719da70a95fb6.jpg
8c5ab585ec8a414e127385ebd77e64ec.jpg
28fd20b4998a18514223498aa66f2bde.jpg
17fa8fd2d3ba53a5b10140c09774eb38.jpg
f564c498cbe0c4a1fc541d0760c8f8c4.jpg
be83e5b5bdebb23ea68c4415637af17c.jpg
b102e3ffb77e256f77894b82875c8341.jpg
eceed73c09caf1fe59475eb0134e8239.jpg
6b8646dafa876b59aff495d0ebe6d348.jpg
 
Last edited:
Jetrider

Jetrider

Hi, great product but 2 questions.
It s 160 impeller???? But with only 75 mm and not 83mm?

When we want a driveshaft it s only custom driveshaft or another is compatible? Bearings models?

Thanks
 
Last edited:
Sasquachcrap

Sasquachcrap

Location
North Carolina
The bearings and seals are not the same size as the Yamaha but can be bought at any good bearing store. That where I got these. 63052rsc3 bearing and Tcm seal 25x43x8tc-bx. The drive shaft from a Superjet can be used. However it will be 1/2 inch shy of proper spline engagement as with any standard oem 155 stator. The impeller ran will be determined by the wear ring used. I have been running 155 props. 160 testing will start in the spring. Yes it's 75mm hub so it mates great with the majority of 155 props out there. I would say you can run a 83 mm hub prop but haven't tested that yet.
 
Jetrider

Jetrider

So good. I have oem 155 pump with 7/15 thinblade with 950 dasa. Who have try 160 pump for know what impeller size for this pump?
 
Sasquachcrap

Sasquachcrap

Location
North Carolina
Jetrider said:
So good. I have oem 155 pump with 7/15 thinblade with 950 dasa. Who have try 160 pump for know what impeller size for this pump?
Click to expand...

Would you run this pump with a 155 wear ring or 160?
I would say you could continue running your current prop and wear ring and feel a improvement. Wear ring size determines your prop size. Currently I do not have a 160 wear ring ready for sale yet.
 
Slough Burner

Slough Burner

Location
PST
Did you weld up and re-machine the stator housing to work with the older wear ring?
Or is the 8-vane different on the outside from the big hub 6-vane HO pump?
 
You must log in or register to reply here.
Top Bottom