155 pump shoe in superjet

[Whateverguy]

I've read wdk makes a 155 pump shoe for a sj that requires little to no modification to fit.
I've reached out to them with no response, I assume they are longer in business?

Who else makes one? My JD obviously doesn't fit that great and I prefer not to grind into the hull etc....who has done this and are there any tips and tricks I should know?

 

[TOBY]

Rrp

 

[Whateverguy]

Rrp

You have experience with this install?

 

[Harbor]

RRP Rickter Pump Shoe 155MM

The RRP Rickter 155mm Aluminum Pump Shoe fits all Yamaha Superjet, 1993-1996 WaveBlaster 1, Rickter and most aftermarket yamaha based hulls. A lip at the top of the shoe and behind the intake grate has been added to create a better seal when used in conjuction with the 155mm Pump Shoe Seal. CNC...

www.blowsion.com

I removed a OE 144 plastic shoe from Vision hull and installed this 144 tunneled 155 RRP shoe Toby mentioned. Shoe needed a little belt sanding to fit.. did not require grinding on the hull… I’ll add some pics later….

: here are the pics, I belt sanded area 1 of pump shoe so it would drop further into hull…

Also belt sanded the back of both ears some to fit further into hull…

 

[Whateverguy]

RRP Rickter Pump Shoe 155MM

The RRP Rickter 155mm Aluminum Pump Shoe fits all Yamaha Superjet, 1993-1996 WaveBlaster 1, Rickter and most aftermarket yamaha based hulls. A lip at the top of the shoe and behind the intake grate has been added to create a better seal when used in conjuction with the 155mm Pump Shoe Seal. CNC...

www.blowsion.com

I removed a OE 144 plastic shoe from Vision hull and installed this 144 tunneled 155 RRP shoe Toby mentioned. Shoe needed a little belt sanding to fit.. did not require grinding on the hull… I’ll add some pics later….

: here are the pics, I belt sanded area 1 of pump shoe so it would drop further into hull…

Also belt sanded the back of both ears some to fit further into hull…

This is exactly what I wanted to know!
Thank you!