2003 SXR Electronics Differences

Mike W

Infidel
Location
North Florida
Tried searching but couldn’t find my specific answer. I believe Kawasaki used the 750 electronics in the 03 SXR. What are the differences between the 750 and 800 electronics? CDI, stator, flywheel?
 

Mike W

Infidel
Location
North Florida
2003 SXR uses an AC (Alternating Current) Magneto System to charge the CDI.

2004+ SXR's use a DC (Direct Current) Ignition System to charge the CDI. In other words, the electricity supply for the CDI comes directly from the 12 Volt DC Battery.

Zeeltronic only works on the DC Systems...
Thanks for the info. I had a buddy give me a 800 CDI as a backup. Need to know if I can use it in my 03?
 
If it's a cdi with a bunch of wires coming out, it's the same as the 750 ones. If it's an 04 and up, the wire harness plugs into the cdi. No wires dangling out. 04 and up looks similar to the yami 760 cdi. 04 and up stator only charges the battery. Has 2 empty legs where the 750 secondary ignition coils would be wound.
 

Mike W

Infidel
Location
North Florida
If it's a cdi with a bunch of wires coming out, it's the same as the 750 ones. If it's an 04 and up, the wire harness plugs into the cdi. No wires dangling out. 04 and up looks similar to the yami 760 cdi. 04 and up stator only charges the battery. Has 2 empty legs where the 750 secondary ignition coils would be wound.

Awesome. Thanks
 

Mike W

Infidel
Location
North Florida
Since I have my motor out, what specifically do I need to convert to 04+ electronics correctly? 04+ stator, flywheel etc?

I already have a new OEM 04+ CDI.
 
You need the 04 electrical box with cdi. You can use the old stator but the new cdi only requires the blue and green trigger wires be used. The red and purple are the secondary windings on the stator and dont get used. The 3 wire charging plug stays the same. 2 browns and a black I think.
 

Mike W

Infidel
Location
North Florida
You need the 04 electrical box with cdi. You can use the old stator but the new cdi only requires the blue and green trigger wires be used. The red and purple are the secondary windings on the stator and dont get used. The 3 wire charging plug stays the same. 2 browns and a black I think.

Thanks for the info. Much appreciated.
 
Top Bottom