- Location
- Coeur D' Alene, ID
Put a deposit on a new hull and sadly don't have the space for 2 skis so the DVX has to go. Has been an amazing hull and pushed my progression through the roof, but got a sponsorship opportunity I can't pass up.
2014 Xscream DVX Ant Burgess Replica Hull/Hood
Heavy Layup (Extra Carbon Reinforcement)
Xscream Comp Pole
Xscream Bracket
Xscream Chinpad
Xscream Intake Grate
Xscream Ride Plate
Xscream Oring Pump Shoe
Xscream Heel Locks
RRP Hoodlatch
The Good:
-One of the best hulls on the planet, amazing handling and super light weight even with the extra layup.
-Drop your internals and steering and go backflip
-Looks amazing from 10' away
-Newer pole bracket and uprights/bushings
-It's a Stoyer built DVX
-Registered Ski for easy transfer
-Will Ship at your cost
The Bad:
-Hull needs carbon work in a few spots. I found out too late that the bedplates for the 66E based motor XS runs was digging into the bottom of the hull at each bolt on the exhaust side of the hull. This combined with a deep scratch from a rivet in a beach stand in the exact same place resulted in a crack in the hull. The crack is in a spot that should be easy to vacuum bag. For someone with composite skills this should be a cheap fix ($200). I do not have said skills and with new hull on the way I am just selling this cheap so someone can pick up a good hull for a good price. Happy to get more pics/videos on request.
-Normal stress cracks in paint from flex
-Small damage to rear corner rail and inside hood liner
-Stripped down hull and turf in preparation for a custom wrap, but Covid hit and stopped that process, so I just rode it as is, will need to be turfed.
Price: $6,000
(To get this new from XS today is ~$11,000)
2014 Xscream DVX Ant Burgess Replica Hull/Hood
Heavy Layup (Extra Carbon Reinforcement)
Xscream Comp Pole
Xscream Bracket
Xscream Chinpad
Xscream Intake Grate
Xscream Ride Plate
Xscream Oring Pump Shoe
Xscream Heel Locks
RRP Hoodlatch
The Good:
-One of the best hulls on the planet, amazing handling and super light weight even with the extra layup.
-Drop your internals and steering and go backflip
-Looks amazing from 10' away
-Newer pole bracket and uprights/bushings
-It's a Stoyer built DVX
-Registered Ski for easy transfer
-Will Ship at your cost
The Bad:
-Hull needs carbon work in a few spots. I found out too late that the bedplates for the 66E based motor XS runs was digging into the bottom of the hull at each bolt on the exhaust side of the hull. This combined with a deep scratch from a rivet in a beach stand in the exact same place resulted in a crack in the hull. The crack is in a spot that should be easy to vacuum bag. For someone with composite skills this should be a cheap fix ($200). I do not have said skills and with new hull on the way I am just selling this cheap so someone can pick up a good hull for a good price. Happy to get more pics/videos on request.
-Normal stress cracks in paint from flex
-Small damage to rear corner rail and inside hood liner
-Stripped down hull and turf in preparation for a custom wrap, but Covid hit and stopped that process, so I just rode it as is, will need to be turfed.
Price: $6,000
(To get this new from XS today is ~$11,000)
