2014 eme Micro FR For Sale

[AquaSmurf180]

2014 eme Micro FR
Kawasaki Big Pin 830 cc (Engine was assembled in 2017)
Re-Sleeved cylinder by advanced sleeves
Cylinder was honed using a torque plate
Modified SXR porting
Case ported
Wiseco 84.5 forged pistons
New Hot Rods crank 2017
carbon reeds
port matched factory wet pipe
AVX PRO swirl head with Group K head gasket.
standard Kawasaki ignition with charging flywheel
MSD ignition coil
185 psi compression both cylinders
SXR super BN carbs jetting and pop off set for engine
SXR 140 pump
Solas 11/16
worx scoop grate
X2 TRIM
SCAT trim cables
X metal adj pole
Blowsion Ball bearing steering
Blowsion 0 degree bars
UMI throttle
2.25 car tank
primer
bildge with handle bar switch
Factory brand octane water box
midshaft bearing carrier
R&D spark arrestor plenum
Trim lever
stainless hardware
very solid ski
asking 7,900
call or txt 5705293797
8 hrs run time fresh water only

Ready to flip!

 

[Ron]

Good deal nice ski!

 

[blaster24]

willing to sell the hull

 

[AquaSmurf180]

willing to sell the hull

Looking to sell the ski complete ready to ride.

 

[AquaSmurf180]

2014 eme Micro FR
Kawasaki Big Pin 830 cc (Engine was assembled in 2017)
Re-Sleeved cylinder by advanced sleeves
Cylinder was honed using a torque plate
Modified SXR porting
Case ported
Wiseco 84.5 forged pistons
New Hot Rods crank 2017
carbon reeds
port matched factory wet pipe
AVX PRO swirl head with Group K head gasket.
standard Kawasaki ignition with charging flywheel
MSD ignition coil
185 psi compression both cylinders
SXR super BN carbs jetting and pop off set for engine
SXR 140 pump
Solas 11/16
worx scoop grate
X2 TRIM
SCAT trim cables
X metal adj pole
Blowsion Ball bearing steering
Blowsion 0 degree bars
UMI throttle
2.25 car tank
primer
bildge with handle bar switch
Factory brand octane water box
midshaft bearing carrier
R&D spark arrestor plenum
Trim lever
stainless hardware
very solid ski
asking 7,900
call or txt 5705293797
8 hrs run time fresh water only

Ready to flip!

 

[Tony Waters]

Still available?


Sent from my iPad using Tapatalk Pro

 

[Tony Waters]

I’m Interested in complete ski. Message me if you still have.


Sent from my iPhone using Tapatalk Pro

 

[AquaSmurf180]

I’m Interested in complete ski. Message me if you still have.


Sent from my iPhone using Tapatalk Pro

Yes the ski is still available

 

[jnitchoff]

Looking for trades?

 

[AquaSmurf180]

Looking for trades?

Not looking for trades at this time.

 

[kitt]

Where is this ski located?

 

[AquaSmurf180]

Where is this ski located?

Central Pennsylvania

 

[Gary myers]

2014 eme Micro FR
Kawasaki Big Pin 830 cc (Engine was assembled in 2017)
Re-Sleeved cylinder by advanced sleeves
Cylinder was honed using a torque plate
Modified SXR porting
Case ported
Wiseco 84.5 forged pistons
New Hot Rods crank 2017
carbon reeds
port matched factory wet pipe
AVX PRO swirl head with Group K head gasket.
standard Kawasaki ignition with charging flywheel
MSD ignition coil
185 psi compression both cylinders
SXR super BN carbs jetting and pop off set for engine
SXR 140 pump
Solas 11/16
worx scoop grate
X2 TRIM
SCAT trim cables
X metal adj pole
Blowsion Ball bearing steering
Blowsion 0 degree bars
UMI throttle
2.25 car tank
primer
bildge with handle bar switch
Factory brand octane water box
midshaft bearing carrier
R&D spark arrestor plenum
Trim lever
stainless hardware
very solid ski
asking 7,900
call or txt 5705293797
8 hrs run time fresh

 

[Gary myers]

I have the same ski w a 718 superhero in it. How does the big pin compare in relation to mine?

 

[AquaSmurf180]

I have the same ski w a 718 superhero in it. How does the big pin compare in relation to mine?

I would say they’d be pretty identical,mine may have I tad more low end because of the larger bore and the porting is configured for low end hit.

 

[AquaSmurf180]

Here’s a few more hull pictures

 

[Frassetto98]

How much and where are you located

 

[Yami-Rider]

How much and where are you located

asking 7,900

Central Pennsylvania

 

[Frassetto98]

What’s a good number I can reach you at I’m interested

 

[AquaSmurf180]

What’s a good number I can reach you at I’m interested

5705293797