I only paid like $300 for the vinyl cutter she has made a good amount of $$ making decals on eBay. Plus she has made all our registration numbers and other decals for our skis and our dirt toys
2015/2016 PHANTOM winter build
- Thread starter miah
- Start date
This just came today $30 from http://speed-daddy.com/other/silicone-hoses#/page/1 Says it's 4ply and can handle up to 500 degrees it's 2.5" x 1 meter
- Location
- Wasaga Beach
It seems to fit very well and $30 shipped to my door in 2 days not badThanks for the post, I'm going to order one on Monday.
Sent from my C6906 using Tapatalk
BEST WIFE EVER!!!!!
Braap strap installed thanks @JetManiac
Handle pole installed thanks to @sinisterjosh209 for helping my wife with my pole purchase lol
Yeah I started putting the tubes in but I'm still checking all the fitment of steering and throttle stuff before I fight those tubes in.Looking good man, don't forget those breather tubes (that are sooo fun to install)
Thanks Me too mine was the first electric lime green phantom, now 3-4 people have done the same color
SkiPro
Trim down for what!?!?!?
- Location
- E-Town, Ok
If you look in the bottom of the pole, the holes were the tubes go are oval shaped and not round .
Bending/smashing them helps. Me and @Twake struggled for a few minutes trying to get them in.. We put them in the pole first and then put them threw the bracket and pulled them from the inside of the hull.. If you use pinch bolts install them into the pole before the tubes.. I couldn't imagine using a pole bolt.. theres no way..
Bending/smashing them helps. Me and @Twake struggled for a few minutes trying to get them in.. We put them in the pole first and then put them threw the bracket and pulled them from the inside of the hull.. If you use pinch bolts install them into the pole before the tubes.. I couldn't imagine using a pole bolt.. theres no way..
I always start the tubes up into the pole before installing and cut a 2" seam in each tube so I can collapse them to get them going down into the hulk and then spin them enough so that there's still good engagement inside the pole and it extends into the hull far enough past the seams.
