2015 EME Aerial 8 sxr800 $7500

Complete running ski. $7500
Hull Only $3,000

Hull- 2015 Eme Aerial 8 hybrid layup carbon inside /fiberglass outside.
Hood cracked and was replaced with a new one. Comes with old hood if desired.
Has T1 universal foot holds fiberglassed in.
New turf was done last year. The foothold padding needs to be redone to the buyers liking.
Jet dynamics extra deep intake grate.

Pole, steering and chin pad -RRP
Blowsion throttle and trim lever
Superjet stop/start switch
Cpi bildge pump switch underneath it
Rule 500gph bildge pump

Motor- sxr800 from a late model ski with low hours last year it had a full tear down, new gaskets,and top end.
Runs beautiful.
Pipe-Factory limited pipe.
SJ round nose water box/modfied for more power
Stock ebox with oem SXR internals.
Pump-skat track mag 145

Ski is located in Atlanta GA.
Test rides available. Ski is running great.
Feel free to ask questions.
Will Trade for car, truck or Motorcycle of equal value.
 

Attachments

  • 20180819_173758.jpg
    20180819_173758.jpg
    265.1 KB · Views: 407
  • 20180819_173738.jpg
    20180819_173738.jpg
    255.3 KB · Views: 409
  • 20180819_173748.jpg
    20180819_173748.jpg
    239.8 KB · Views: 371
  • 20180819_173723.jpg
    20180819_173723.jpg
    209.3 KB · Views: 377
  • 20180819_173649.jpg
    20180819_173649.jpg
    191.3 KB · Views: 366
  • 20180819_173614.jpg
    20180819_173614.jpg
    210.9 KB · Views: 358
  • 20180819_173630.jpg
    20180819_173630.jpg
    104.3 KB · Views: 345
  • 20180819_173602.jpg
    20180819_173602.jpg
    113.4 KB · Views: 328
  • 20180819_173551.jpg
    20180819_173551.jpg
    152.9 KB · Views: 321
  • 20180819_173542.jpg
    20180819_173542.jpg
    170.3 KB · Views: 325
Last edited:
More
 

Attachments

  • 20180819_173518.jpg
    20180819_173518.jpg
    179 KB · Views: 303
  • 20180819_173502.jpg
    20180819_173502.jpg
    151.7 KB · Views: 287
  • 20180819_173454.jpg
    20180819_173454.jpg
    271.5 KB · Views: 282
  • 20180819_173445.jpg
    20180819_173445.jpg
    210 KB · Views: 282
  • 20180819_173429.jpg
    20180819_173429.jpg
    193.9 KB · Views: 279
  • 20180819_172832.jpg
    20180819_172832.jpg
    273.2 KB · Views: 279
  • 20180819_172926.jpg
    20180819_172926.jpg
    268.1 KB · Views: 264
  • 20180819_172942.jpg
    20180819_172942.jpg
    275.1 KB · Views: 291
  • 20180819_172803.jpg
    20180819_172803.jpg
    168.1 KB · Views: 308
Yes I used a 550 tank. I put a rubber Plumbing plug over the front filler spout to seal it up. Then I cut a round hole in the top of the gas tank to fit a 550 gas cap flange. I got a special viton rubber flange seal (rated for gas) from mcmastercarr. . I use stainless steel self tapping stainless steel screws to hold the flange tight against the plastic tank . It's been holding up perfect for almost 3 years now.
 

Jr.

Standing Tall
Staff member
Site Supporter
Location
Hot-Lanta
Just helped Greg out with a water test ! Runs Mint! Great deal for someone coming off Kawi based skiis
That wants to get into Freestyle!

P
 
Top Bottom