Custom/Hybrid 300sx+sn bottom+ waveraider=?
- Thread starter 300swap
- Start date
BruceSki
Formerly Motoman25
- Location
- Long Island
no you will need two layers at least. maybe 3. That is a high impact area and you want it to be strong.
Update and more pics
A couple of updates from the last couple days. Glassed the bulkhead in. Cut a chunk of the nose off, foamed and started glassing that back together today, what do you guys think??
A couple of updates from the last couple days. Glassed the bulkhead in. Cut a chunk of the nose off, foamed and started glassing that back together today, what do you guys think??
Attachments
- Location
- Vegas
Good luck im about to take on the same project
JGringo
When in doubt, Throttle-out.
- Location
- Lafayette, Louisiana
**Second that.
More updates
Well Ive got a lot done since my last post:smokin:. i got the body work done good enough for the girls i c at the lake. Picked up a cheap paint gun, some epoxy primer and some omni single stage paint at napa in town. Mixed up the primer and went for it...and haha well, only a couple runs:redface:, first time using a gun.
Couple days later sanded the runs down and sprayed 3 coats of black went alot smoother then the primer and no runs thank god!!:shocked:
As you can see i just finished laying the turf down, that went pretty good, turfed my 750sx last year.
Picked up a mid-shaft and housing off ebay last week, Tmb pump cone and impeller, driveshaft, stator and B pipe off the x, thanks Brian ,Jamie and scott for the parts!!:biggrin:
U guys think i should get rid of the 62t topend and get 61x its worth the $$ right??
Well Ive got a lot done since my last post:smokin:. i got the body work done good enough for the girls i c at the lake. Picked up a cheap paint gun, some epoxy primer and some omni single stage paint at napa in town. Mixed up the primer and went for it...and haha well, only a couple runs:redface:, first time using a gun.
Couple days later sanded the runs down and sprayed 3 coats of black went alot smoother then the primer and no runs thank god!!:shocked:
As you can see i just finished laying the turf down, that went pretty good, turfed my 750sx last year.
Picked up a mid-shaft and housing off ebay last week, Tmb pump cone and impeller, driveshaft, stator and B pipe off the x, thanks Brian ,Jamie and scott for the parts!!:biggrin:
U guys think i should get rid of the 62t topend and get 61x its worth the $$ right??
