- Location
- tampa florida
Brand new crank works crank 4mill never ran
62t cases has been flycut for big bore sleeves
61x cylinder with northwest big bore sleeves has been ported for the 4mil crank the cylinder has been sitting and has some rust spots see in the pics will need to be bored currently at 84mm this set up runs no spacer plate it will have positive deck height and will have to have domes made for it
All porting was done by Chucky at team Scréam
1,050.00. PENDING
62t cases has been flycut for big bore sleeves
61x cylinder with northwest big bore sleeves has been ported for the 4mil crank the cylinder has been sitting and has some rust spots see in the pics will need to be bored currently at 84mm this set up runs no spacer plate it will have positive deck height and will have to have domes made for it
All porting was done by Chucky at team Scréam
1,050.00. PENDING
Attachments
-
59AFD7D1-9E03-4DED-B07A-5B3C6AD51F48.jpeg -
46C62D18-58D1-49E5-B285-910C80C8158F.jpeg -
3019B282-C870-4B47-9445-CCAF8C748FDB.jpeg -
9CBA9C9B-1095-496B-AC8C-3EA2591A7F61.jpeg -
A55B2B92-70C7-456A-9914-4FE6968D8935.jpeg -
FE572BC0-774D-494B-8C76-EF52720B9C9F.jpeg -
A9302F94-C919-420C-80DE-B1CA706E099D.jpeg -
418ED0B4-7C0E-49A8-99A5-2BB7E3EFAEAD.jpeg -
144A9805-E7E6-4A8B-93A7-F2185C2B70A7.jpeg -
D80382D7-F8A0-4513-A299-82A1A5EFB091.jpeg
Last edited:
