Super Jet 61x porting

[jeremy chambon]

do these porting teplates look like a good port? they are 61x freestyle port templates i do not know how made them. and what about the transfer port? leave them alone or cleand them up and how would u do that? pics would be nice for comparison.

 

[Matt_E]

Those are Speedlogic Porting Templates.
They work very nicely.

Here's a write-up: http://www.x-h2o.com/threads/1540-Home-Porting

 

[jeremy chambon]

thanks did u see the pics of my ski with the pole i got from u?

 

[Matt_E]

Just looked at it. Looks good!
Sorry it didn't work with the Blowsion bracket.

 

[munki63]

Those porting templates work wicked! Made huge gains on my old set-up

 

[jeremy chambon]

Just looked at it. Looks good!
Sorry it didn't work with the Blowsion bracket.

no big deal that port post of yours rocks its good stuff. what size of jets should i run? im running the stock pipe and carb set up im going to chop the stock head a little i would like to have it set up where i can run just 93 since 110 is hard to come by.

 

[Matt_E]

What carbs and pipe are you going to run?

 

[jeremy chambon]

stock at the moment i would like a b pipe but i dont have 600 bucks to drop on a pipe

 

[munki63]

How would a stock ski work with porting? Not sure I would want to try it

 

[jeremy chambon]

whats going to happen it runs like crap? what makes it no long stock having a pipe? wouldnt any thing thats not OEM make it no longer stock such as a port job and a milled head?

 

[jeremy chambon]

hey matt in the 61x manifold theres a triangle looking thing can it be cut and sanded out or is it important?

 

[Matt_E]

I'm not sure. I think I took it off on one I did a few years ago.

 

[munki63]

hey matt in the 61x manifold theres a triangle looking thing can it be cut and sanded out or is it important?
View attachment 151355

Its supposed to help mix the air and gas
:dunno:

 

[jeremy chambon]

thats what i had figurd but wasnt sure

 

[jeremy chambon]

should i start the polishing and final sanding or take more off?

hows the angle leading in to the area that i ported? should i try and port more farther in the port so theres less angle?

 

[jaxrider]

its the exhaust area so take it all out .

 

[jeremy chambon]

k sounds good

 

[jeremy chambon]

to the eye doctor to get metal removed from my eye. yes i was wearing my safety glass.

 

[wrighteous]

Not good! hopefully its ok, you can never be too careful with protecting ur eyesight.

 

[jeremy chambon]

tell me about it im a welder lol. i got it out and they said no damage was done.