krawler98
Always wrenchin'
- Location
- Roanoke, VA
What size bolts hold the cylinder down onto cases on 61x 701?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
61x what size bolts hold cylinder to cases
- Thread starter krawler98
- Start date
- Location
- Ahwahnee, CA
krawler98
Always wrenchin'
- Location
- Roanoke, VA
awesome thanks!
- Location
- central florida
Just for s&g, I brought up the above in #2 listed part numbers on the mcmaster.com site. They seem to be for 1.5 pitch, not the needed 1.25
- Location
- Ahwahnee, CA
Cylinder to Cases 4 18-8 Hex M10 1.25 30 40 14mm 16-29.
I'm not sure about the part number but the above specs are accurate, right? I just checked the McMaster Carr site and it does pull up the 1.5 pitch.
I'm not sure about the part number but the above specs are accurate, right? I just checked the McMaster Carr site and it does pull up the 1.5 pitch.
- Location
- central florida
this is the real thing. Capscrews are not ss but chrome plated steel- has some advantages like less stretch. The 4 short ones are 10-1.25 x 40mm (actually 41), the 2 long ones 10-1.25 x 55mm. @JetManiac should have them. If not, I do.
- Location
- central florida
Got 20 bolts silk cloth on ah. 1g each.
picture of a bolt
So if we use the cylinder screw with a nut, then it magically becomes a bolt?
http://en.m.wikipedia.org/wiki/Bolt_(fastener)
- Location
- central florida
No, painting Zebra stripes stripes on a J.A. does not make it a Zebra. The wiki people are quoting from a machinist handbook that is just rehashing crap from 100 years ago. It's somewhat popular still to use the term "bolt" to distinguish it from (wood)screw, however since WW1, mechanics, machinists and engineers have preferred the other noun.
Further the defendant sayeth not.
Further the defendant sayeth not.
Yoda you speaketh in riddles.
Philip Clemmons
Owner, P&P Performance
- Location
- Richmond, Va
Sent from my iPhone using Tapatalk
Ducky
Back in the game!
- Location
- Charlotte, NC
Wait...so do I start calling them capscrews now?
jeremy chambon
Need more power
- Location
- rockford MI
What are the torque spectacle measured in? Foot lbs or some over seas metric crap.
- Location
- central florida
Yamaha suggests: 17 ft/lbs first go around, then 29 ft/lbs final torque.