Super Jet 62t/61x how to

[storch1]

I was wondering all the specific tools needed to complete the bottom end swap. Currently have a 61x and was wondering what all is involved in the bottom end swap. Thanks

 

[TheBuzzard]

hammer, phillips screwdriver, 14mm socket, 12mm socket,10mm socket and open end 10mm wrench, torque wrench for starters.

 

[Shadow7874]

What exactly is different between the two bottom ends?

I have completely taken down my 61x and its pretty easy with basic wrenches and a torque wrench. Might need a flywheel puller too depending on what all you are doing.

 

[kieran79]

New cases and carbs plus seals and gasket kit

 

[storch1]

Any torque specs that are handy to know for this?

 

[tatronation]

What exactly is different between the two bottom ends?

I have completely taken down my 61x and its pretty easy with basic wrenches and a torque wrench. Might need a flywheel puller too depending on what all you are doing.

62t has better reeds and is dual carb most of the time. Better air flow means more power.


Sent from my iPhone 4s using Tapatalk

 

[storch1]

And case sealant? Can someone explain the top and bottom parts of the cases?

 

[JonnyB]

Don't thank me thank #ZERO for posting this

Yamaha Service Manual SuperJet.pdf
Download link: http://www.mediafire.com/?d09ct9u1plmros1

 

[storch1]

Thanks guys