I recently put a 62t/62t motor in my squarenose and am having some exhaust issues. The motor came out of a waveventure so the temperature probe is on the opposite cylinder compared to my old 650 motor. So what do I need to do to mount the stock superjet exhaust onto it. The exhaust mounts on this head are on the opposite cylinder too.
62t swap questions sn sj
- Thread starter Mattyboy45
- Start date
- Location
- Mooresville, NC
Install helicoils to bring the M10 bolts down to M8, or drill your manifold bigger. Swap your 62T head for a 61X head and you're good to go
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Location
- fortcollins
Ada head will solve that problem and is a good upgrade
Magyar68
Really!!!
- Location
- Lewisville
Was wondering this myself, will the M8 1.25 Heli-Coils just go right into the Cylinder in the m10 1.25 Threaded Exhaust Port Bolt hole?
If I use a 64u head, or a 61x head will I have to have them machined?