Jawbreaker
Rick James Edition
- Location
- Music City, TN
Thought I'd share this pic... It's TOBY's SJ... Extra kewl in my book...
66e with a B-Pipe!
- Thread starter Jawbreaker
- Start date
WFO Speedracer
A lifetime ban is like a lifetime warranty !
- Location
- Alabama
So is it just an adapter plate bolted to the 800 engine ?
- Location
- Pueblo, CO
Fake! Photochopped! That can't possibly work.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
looks like a plate with an SXR/750 FP manifold.
But, the flywheel cover is a 61x/62T.
Plus no PV's
shannigans
But, the flywheel cover is a 61x/62T.
Plus no PV's
shannigans
Last edited:
Jawbreaker
Rick James Edition
- Location
- Music City, TN
I'll haveta take some more closer pics... the flywheel cover is cool huh... It's a 1 off motified 66e one... hacked and fixed! It turned out really nice!
66e
I wonted to try and see if it would work/fit its a GP800 with 1300R non PV cylenders 84mm bore 62T totaloss pickup and flywheel, carbs are 46SBN running pumpgass. I had a yamaha B-pipe i sold the manifold bought a new SXR wetpipe manifold, me and a friend made the adapters i then drilled the water passages in them installed a .5 waterline and re drilled the pump that line feeds the manifold and a .375(OEM) feeds the headpipe. it was a fun project/cool. im also using 62t bedplates hope you enjoy
I wonted to try and see if it would work/fit its a GP800 with 1300R non PV cylenders 84mm bore 62T totaloss pickup and flywheel, carbs are 46SBN running pumpgass. I had a yamaha B-pipe i sold the manifold bought a new SXR wetpipe manifold, me and a friend made the adapters i then drilled the water passages in them installed a .5 waterline and re drilled the pump that line feeds the manifold and a .375(OEM) feeds the headpipe. it was a fun project/cool. im also using 62t bedplates hope you enjoy
Attachments
Last edited:
- Location
- Reno,NV
when is this going into production ? will there be a solution for pv?
Bedplate ?
Bedplate ?
Polish jet pilot
4aces4aces4aces4aces4aces
- Location
- Warsaw, Poland
skilfull engineering!
- Location
- northern ireland
itl be interesting as to how this runs, is the kawi manifold the same distance to the centre of ports as the gpr exhaust ports are?
is the kawi manifold the same distance to the centre of ports as the gpr exhaust ports are?
no not even close.
- Location
- northern ireland
howd you get round this then?
.5in adapters
- Location
- TN
Interesting setup!
- Location
- northern ireland
are the bedplates on the 66e in the right place to bolt straight into a superjet?
- Location
- northern ireland
ahh i see you are running 62t bedplates, do they bolt straight onto the 66e cases?
- Location
- northern ireland
come on guys let us know how this thing runs! lol
I would imagine they are running BReed's mod cases, that pipe is exactly what I wanted to not sell my 66E setup. I couldn't get anybody to come up with a solution (even though both Brandon and Waterdawg told me they had a manifold designed that would work) so it unfortunately got replaced with a 61x motor. Let us know how it runs, I had the same idea with the Kawi manifold to help eliminate the bolt pattern overlap. Those look like Brandon's intake manifolds too, also my idea.
Droste14
Be About It!
- Location
- Wichita, KS
Rat rod of jet ski's?