- Location
- Edmonton, AB
I need too know the difference between the 650 Limit Chamber and the 701 Limit Chamber
Last edited:
701 Vs 650 B-Pipe
- Thread starter XJCrawler
- Start date
snowxr
V watch your daughters V
- Location
- Waterford, MI
650 chamber isn't technically a "B" pipe, but similar. Different length/volume for the smaller bore cylinder and smaller exhaust port design. Doesn't run well compared to a ltd B on a 701 motor.
do you have the specs on the 650 and or pict
Last edited:
- Location
- Edmonton, AB
Anyone have a comparison shot of the two or now the different dimension. The guy that has the chamber lives 150km away and I dont want to drive out there for a 650 chamber.
BombThreat
'Diggity
- Location
- Johnstown, NY
I think ive got a 650 chamber... its noticeable smaller and has factory pipe stamped in big letters on the chamber.
superjetkev
x-h2o
- Location
- downriver, ontario CANADA
yup what he said. i have held both and compared. 650 chamber is a lot smaller in diameter and has a lot less volume. i think it was ROO in the boards here ran one on a 701 and said it wasnt bad at all. search for his powdercoat blue motor pics...it shows what that chamber looks like. maybe he will chime in and let you know first hand.
- Location
- Edmonton, AB
Are they the same length and one is just skinnier?
superjetkev
x-h2o
- Location
- downriver, ontario CANADA
i dunno if the length is EXACT, but pretty close if i remember right.
5810
WHERE-THE-SEAT-AT
- Location
- Knoxville TN
u might have a mod chamber
These pics are courtesy of JJC568's build. I remember he had a 650 chamber so I stole his pics and brightened them up a bit. The green ski is his... The other pics are my limited chamber in my old SN quite a while ago. Should be fairly obvious...
Attachments
- Location
- Edmonton, AB
perfect thanks! thats exactly what I need to see