or just flip the half-moon around.:moon:
750 motor/elec guys, can I see some pictures?
- Thread starter djyox
- Start date
or just flip the half-moon around.:moon:
A buddy tried that on his 44, and got lousy throttle action, the wheel fixed his trouble.:highhorse:
i had one of those throttle wheels on the x2 when it had the 650. that engine/carb went into the jetmate. on the 750's carb, i flipped the piece around and the throttle response is the same as it would normally be. sometimes you have to tweak the brackets to align properly.
and now, the jetmate has a blingy throttle wheel!!!
and now, the jetmate has a blingy throttle wheel!!!
Sweet, btw the ADA version is only about $14.
djyox
Old school -not by choice
- Location
- Twincities, MN
Well not that I don't want to switch over to a Mik 44/46+, but what can I do about the stocker carb? Just make due?
And I was thinking about that SX throttle cable, what do you do with all the extra cable? is there a nice place to tuck it, or just any place a zip-tie will hold it?
And I was thinking about that SX throttle cable, what do you do with all the extra cable? is there a nice place to tuck it, or just any place a zip-tie will hold it?
shawn_NJ
Chasing waves.
- Location
- Daytona Beach
I have that bracket on my brothers x2, but I am afraid of cracking the mount to remove it..... But I would go with a 46SBN instead, the stock carb ran like crap on my small pin 750. I replaced it after the first day and its was a BIG performance gain. Definetly worth the $$$ and effort.
djyox
Old school -not by choice
- Location
- Twincities, MN
Oh yeah, another quick question. On the stock 750 ebox (I believe its stock) its got what looks like a solenoid and two water lines that connect to it... Is this water injection for the pipe, or just a temp sensor? Because it would be kick ass if it was water injection... (well maybe not... but what the hell is it?)
- Location
- Barrie, ON
It's an over heat sensor. You don't need to hook it up.
wadman
wadman
- Location
- winsted CT
Did you clip the back corner of the stock airbox?
wadman
wadman
- Location
- winsted CT
yes it is clipped off