8100 Rev limit modded stock CDI's

[way2manyhobbies2keep]

I have been modding CDI's, you can mod your own but, thats not for everyone.

I have 62t's, can include jumpers for the 61x stator.

I have some modded 61X cdis.

$150 Shipped

Heres my ebay ad with ebay pricing lol

OEM Yamaha Wave runner 701 62t CDI With 8100 RPM Rev Limit Mod Superjet Wave WB1 | eBay

Made in Japan, this high-quality product will not disappoint. With a rev limit mod of 8100 RPM, your superjet wave WB1 will be ready to ride the waves. In addition to its impressive performance, this CDI has a California Prop 65 Warning, reminding you to stay safe while enjoying your ride.

www.ebay.com

I can mod yours, currently charging $50 each or $40 for batches of 5 or more. I take venmo and paypal, you CAN use goods and services or buyer protection; should be a decent way to sort out scams.

 

[mcalvin318]

GLWS

 

[WB800BLASTER]

prop 65 ........thanks I needed that laugh this am!

 

[way2manyhobbies2keep]

prop 65 ........thanks I needed that laugh this am!

definitely don't eat it

 

[waterfreak]

Can we save a bit of money if we send in or own cdi to modidfy?

 

[way2manyhobbies2keep]

Can we save a bit of money if we send in or own cdi to modidfy?

Yah, and bulk preferred

 

[waterfreak]

Yah, and bulk preferred

pm'ed you

 

[Krenn Power Sports]

sent a PM also

 

[way2manyhobbies2keep]

Pmd' you both
texted steve
fb messaged john

thanks for the interest bois

 

[way2manyhobbies2keep]

maybe a bump?

 

[TheBuzzard]

Protec used to do the mod for $75 but that ages ago. Just about as good as an MSD enhancer . Good deal

 

[way2manyhobbies2keep]

Protec used to do the mod for $75 but that ages ago. Just about as good as an MSD enhancer . Good deal

Protec still does it for $110, theirs is with the adjustable pot which imo is pointless and has potential for water intrusion.

I'm doing this the simpler way and found a methodology that's cost effective for me to do under the table.

OEM CDI w/ Pro-Tec Rev Limit Mod Yamaha 650 / 701 (61X) – Pro-Tec Performance

Pro-Tec modified CDI unit with adjustable rev-limiter. Fits all Yamaha 650 and 701 (61X) ignitions. Please note: Pro-Tec can also modify your existing CDI unit for $110.00. Just send in your CDI and it will be returned after only 1 or 2 days in our shop.

pro-tec.us

 

[TheBuzzard]

Protec still does it for $110, theirs is with the adjustable pot which imo is pointless and has potential for water intrusion.

I'm doing this the simpler way and found a methodology that's cost effective for me to do under the table.

OEM CDI w/ Pro-Tec Rev Limit Mod Yamaha 650 / 701 (61X) – Pro-Tec Performance

Pro-Tec modified CDI unit with adjustable rev-limiter. Fits all Yamaha 650 and 701 (61X) ignitions. Please note: Pro-Tec can also modify your existing CDI unit for $110.00. Just send in your CDI and it will be returned after only 1 or 2 days in our shop.

pro-tec.us

Yea just solder it solid and forget it

 

[orangefinger]

why is the rev limit 8100 ? in the past other where higher 8900

 

[way2manyhobbies2keep]

why is the rev limit 8100 ? in the past other where higher 8900

Because the modification I do raises the limit to 8100, which is higher than most setups even need.

What rwv limit do you need for your setup

 

[TheBuzzard]

Because the modification I do raises the limit to 8100, which is higher than most setups even need.

What rwv limit do you need for your setup

I thought I saw something about 2 different places to solder and one spot gave the lower limit and soldered all the way across gave the higher limit. Is that right? I know you can put a diode in there to make it lower or the thing that makes it adjustable like protec does. That's useless in my opinion

 

[way2manyhobbies2keep]

I thought I saw something about 2 different places to solder and one spot gave the lower limit and soldered all the way across gave the higher limit. Is that right? I know you can put a diode in there to make it lower or the thing that makes it adjustable like protec does. That's useless in my opinion

One spot is no limit, one spot is 8100, bridge the no rev limit spot with a couple resistor and a pot and you can adjust.

98% of us wouldn't know what to adjust to

 

[Toshbar]

I’d like to send you mine, but I need more posts to PM you….

 

[Toshbar]

Please email me. maxtay08650@gmail.com

 

[TheBuzzard]

One spot is no limit, one spot is 8100, bridge the no rev limit spot with a couple resistor and a pot and you can adjust.

98% of us wouldn't know what to adjust to

Yea i thought so. No need for any limit anyway . Unless you're the idiot that holds it wide open to blow the water out on the trailer relying on the limiter and those guys are out there