- Location
- knoxville,tn
Lamey
I need a good starting point with these carbs if anyone has some info on it.
setup is as follows.
8mm pv lamey -freestyle ported-85mm flattops.
case has been ported and epoxied.
new total loss.
ada heads at 210 psi..
B pipe limited.
The carbs are from riva,mikuni's with no butterfly's on riva manifold..
Any help would be nice
I need a good starting point with these carbs if anyone has some info on it.
setup is as follows.
8mm pv lamey -freestyle ported-85mm flattops.
case has been ported and epoxied.
new total loss.
ada heads at 210 psi..
B pipe limited.
The carbs are from riva,mikuni's with no butterfly's on riva manifold..
Any help would be nice
Last edited: