91 SJ pump need help.

[luisdeleon]

Putting this back together and can’t find what you call these two connections. Or what it needs to go to. Thank you

 

[SteveC]

The big opening on pump was for siphon bilge. If not using, plug it with epoxy/silicone. The fitting on hull was also for siphon bilge, so just put a plugged hose chunk on there to seal it.

 

[SteveC]

If you decide to run dual cooling lines, you can drill the epoxy plug in the pump, tap it, and glue in a barbed fitting.

 

[Roseand]

Unless you're running dual cooling, reconnect the factory bilge siphon. It's awesome.

 

[luisdeleon]

Thanks guys I can’t wait to get this thing going