97 wave venture cooling hoses

[Operator]

Hey everyone…1st post I picked up a 97 wave venture that had the engine removed. I’m having trouble figuring where the hoses go. I think the hose with a Y fitting goes on where the black line points to on the exhaust. Where the exhaust turns up there is a hose barb & I think the hose goes from there to the back side of the head. Pretty sure I know where the hose from the rubber coupler goes. No clue on the barb on front of head or 2 smaller barbs next to where carbs bolt up. Hoping I can get some insight…thanks

 

[fx1mark]

Look down this list, there is a download link for the service manual, waveraider 94 to 97 is the same as yours. https://www.x-h2o.com/threads/service-manuals-–-parts-catalogs-–-owners-guides-–-wiring-diagrams-–-software-etc.74013/

 

[Operator]

Look down this list, there is a download link for the service manual, waveraider 94 to 97 is the same as yours. https://www.x-h2o.com/threads/service-manuals-–-parts-catalogs-–-owners-guides-–-wiring-diagrams-–-software-etc.74013/

 

[Operator]

I do have a manual. I would’ve thought there’d be a separate section just for cooling diagram. After looking at it a number of times I realized I have to look in different areas & was able to find some but not all. Thanks

 

[WFO Speedracer]

701 or 760 ?

If it's a 760 I can snap a pic for you and point out where they go.

 

[Operator]

701 or 760 ?

If it's a 760 I can snap a pic for you and point out where they go.

It is a 760. Appreciate that. I think I’ve figured it out, but to know for sure would be great.

 

[WFO Speedracer]

Headed there today I will shoot a few pics for you and post them up.

 

[WFO Speedracer]

To simplify this the line out the top of the head at the front goes out to the pisser, second pic ,the big cooling line hooks to the exhaust pipe at the top , third and fourth, pic the line out the rear of the head goes through the metal exhaust bracket and to the pipe at the front lower fitting, not shown is the hose coming from the pump , it has the y fitting in it, the bigger hose goes to the flush fitting, the smaller hose goes to the lower fitting on the back of the exhaust manifold , it can be seen in the last pic.

 

[Operator]

To simplify this the line out the top of the head at the front goes out to the pisser, second pic ,the big cooling line hooks to the exhaust pipe at the top , third and fourth, pic the line out the rear of the head goes through the metal exhaust bracket and to the pipe at the front lower fitting, not shown is the hose coming from the pump , it has the y fitting in it, the bigger hose goes to the flush fitting, the smaller hose goes to the lower fitting on the back of the exhaust manifold , it can be seen in the last pic.

Thanks a lot for that man. I did manage to get it right, but your verifying that gives me peace of mind. Thanks again

 

[WFO Speedracer]

Thanks a lot for that man. I did manage to get it right, but your verifying that gives me peace of mind. Thanks again

Anytime I just happened to have a complete one and one apart at the same time here.