Blaster About Pro-tec exhaust (superjet) for blaster

M

moncayo23

Location
cádiz
Hi all,

I'm a new user on this page and I have a big question...

I live in Spain, and I have some problems to find a good accessories for my blaster I (96)

But...There is one shop here that have a Pro-tec exhaust for Super Jet... I know that is different than the blaster exhaust...but I want to know. Anyone know if is possible to put the superjet exhaust on my blaster ?

I'm not 100% sure but in case of impossibility, I think if I cut the tube and weld the last part with direction to the water box is valid... but I want your opinion...

Regards and thanks!
 
M

moncayo23

Location
cádiz
Hi guys!

I have my ProTec SuperJet exhaust ready for install... finally I could turn the end of the exhaust and weld again. It has been perfect... but I had a BIGGGG problem now...while I was installing the exhaust, I couldn't continue because I don't know how I can tighten the screws that are between the manifold exhaust... Is impossible to put the key there... Can anyone say me something about this ? or I'll have to pull the engine ??

Thanks again and regards!!!
 
haggis

haggis

its raining again!
Location
Orkney (northern scotland)
ive just fitted a protec exhaust to my blaster aswell, no need to remove the engine but i did have to grind and shape a spanner to fit inbetween the manifold to allow me to tighten the 2 bolts. I think i got about an 1/8th of a turn then rotated the spanner and got another 1/8th and so on, might take a minute but it gets the job done!

moncayo23 said:
Hi guys!

I have my ProTec SuperJet exhaust ready for install... finally I could turn the end of the exhaust and weld again. It has been perfect... but I had a BIGGGG problem now...while I was installing the exhaust, I couldn't continue because I don't know how I can tighten the screws that are between the manifold exhaust... Is impossible to put the key there... Can anyone say me something about this ? or I'll have to pull the engine ??

Thanks again and regards!!!
Click to expand...
 
You must log in or register to reply here.
Top Bottom