ABS pipe

[SJet]

I'm putting in a one way valve. I am going to use 2'' abs pipe. What should I use to glue the pipe to the hull???

 

[DaUpJetSkier]

not positive but any two part marine epoxy should do, maybe 3m 5200 but that might be too soft.

 

[T-bone]

dont let it get to dry....melt city.

 

[fittyx2]

huh?

 

[SJet]

Too dry, melt??? What????????:dunno:

 

[SUPERJET-113]

dont let it get to dry....melt city.

:beerchug: + :trink26: + :439: + :smokin: = :clown:

 

[SUPERJET-113]

I'm putting in a one way valve. I am going to use 2'' abs pipe. What should I use to glue the pipe to the hull???

I would use a good epoxy resin and microfibers/cabosil mixed to peanut butter consistency so you get a good bond form the ABS pipe to the SMC hull.

 

[SUPERTUNE]

Just go to any Marine store and get Marine Tex epoxy, Mix at 5:1 ratio, you will have about 30-or so minutes working time before get a little stiff to work with.

 

[Fathom]

We used 5200 on mine. One bead on the inside and one on the outside. After it cured, I added a second bead on the outside for cosmetics.