- Location
- Stevens Point WI
Hi guys I was wondering what some of you think are the best a/m hulls under 4500. I'm looking for something that is relatively small, but something you can still plain out and ride somewhat normally on. Thanks for the input
Super Jet Affordable a/m hulls
- Thread starter storch1
- Start date
- Location
- South Africa
bob gen 3 4500$
backie-chan 3500$
Aquabot 4500$
backie-chan 3500$
Aquabot 4500$
- Location
- Stevens Point WI
Those are the glass listing prices new correct?
subhard
TITS OR GTFO
- Location
- anchorage ak
Bob gen 3 - $2,995 http://www.x-h2o.com/threads/134741-The-Bare-DIY-G3-BOB-Hull-2-995
subhard
TITS OR GTFO
- Location
- anchorage ak
You won't find a cheaper new am hull
- Location
- Hamilton,
Check out the rage brawlers, great hulls super light and flickable and doesn't ride nose high
http://www.x-h2o.com/threads/118624-Canadian-freestyle-Rage-Composites-Brawler&highlight=Brawler
This is a Canadian one that was built up
http://www.x-h2o.com/threads/118624-Canadian-freestyle-Rage-Composites-Brawler&highlight=Brawler
This is a Canadian one that was built up
subhard
TITS OR GTFO
- Location
- anchorage ak
They don't even come with footholds?
- Location
- Hamilton,
If you read the thread he asked specifically not to have footholds installed when purchased
steve-uk
Manners cost nothing
- Location
- Barrie - ontario
As alex stated, we asked for the footholds not to be installed, they were still supplied but sent loose as we hadnt decided if we wanted that style of foothold or not
great hull, bang for buck its up there with great build quality, we have see a couple of the guys getting close to flipping these hulls on 701 based motors without trim
- Location
- Lodi
The chan is flipping and riding off into the sunset on a 771. Stock ignition stock pump. It has all the latest tect like tons of rocker and a huge intake tract. Plus your going to get an infused hull. Hands down Steve has the market cornered on.a budget hull that will do anything you want.
- Location
- michigan
i just had the first few days on my carbon kev chan. hands down the best ski ive ever owned or ridden. dont have one thing to complain about. I have an 876 jetworks w b pipe and it has way more than enough power for any trick. Backie chan is really an awesome hull at affordable prices
- Location
- Stevens Point WI
Are any of these hulls ones that are unrideable? Meaning nose high 24/7
- Location
- sask, canada
People say that about the BOB but I've rode a gen3 and found it easy to ride, not nose high at all with the long plate. I've also rode the chan and it's very rideable also, I can't provide any input on the Brawler since I haven't rode one.
swapmeet
Brotastic
- Location
- Arlington TX
Maybe a Rok-R with a short ride plate?
The chan planes out really well.. Nose high at very low speed (of course) but any increase and it levels out instantly. I have not been on any other hull listed (I.E. "inexpensive") so I can't say 'best hull ever' about the chan, but its a damn fine ski that performs, is an amazing value, and Steve stands behind his one year warranty.
BTW, This thread has the potential to reach 10 pages and/ or get locked.
- Location
- Stevens Point WI
Haha thanks guys. Hopefully it will reach its ten page potential. Has anyone heard/riden an aquabot for feedback?
- Location
- South Africa
i think its still in the early phase few riders should have reports soon
- Location
- Edmonton, AB
Maybe Trendsetterz new Huck norris if you dont want a full back flip hull
- Location
- Edmonton, AB
Havent seen a ride report on it yet, just a really bad review on a blaster hood made by the aquabot guys
- Location
- Cheney lake Kansas
I really enjoy my brawler and highly recommend it
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
EME also has glass versions (FR) starting at $3995 for micro or Q8 sky