AM Mikuni Billet Aluminum Velocity Stacks

[#ZERO]

Who sells the billet aluminum velocity stacks that come on most aftermarket carbs?

It appears that they're very similar to the bolt-on flame arrestor adapters without the bolt holes.

Also some are tapered longer inside for a machine press fit on Mikuni carbs.

 

[crammit442]

Who sells the billet aluminum velocity stacks that come on most aftermarket carbs?

It appears that they're very similar to the bolt-on flame arrestor adapters without the bolt holes.

Also some are tapered longer inside for a machine press fit on Mikuni carbs.

I don't know of anyone that sells them outright since most of them have a proprietary shape intended to put the carb signal at a particular location for it's given design. You might be able to get Brazina or Novi to sell you a couple, but I doubt it. The tops of the carbs have to be cut off prior to boring to accept the air bell and most of them have two or three interference fits requiring several steps in the bore. Good luck!

Charles

 

[GIL]

I don't know of anyone that sells them outright since most of them have a proprietary shape intended to put the carb signal at a particular location for it's given design. You might be able to get Brazina or Novi to sell you a couple, but I doubt it. The tops of the carbs have to be cut off prior to boring to accept the air bell and most of them have two or three interference fits requiring several steps in the bore. Good luck!

Charles

what he said

 

[w-nut]

go see your local machinist im sure they could machine up what you need at a fairly good price . ive machined up a few and fitted them into rally car turbos over here . not to hard to do on a jet ski carb