AM waterbox

[wikstromm]

Does anyone have like picture of a cut trough/cut open am waterbox? Rrp, pfp, xs, some sort, curious how they are inside

 

[kevbo]

Most of them are single chambers with the outlet tube near the bottom. Wrap around pipes don't allow enough room for anything else plus riders like the noise.

 

[maxsimoneau]

Here's a PFP

 

[wikstromm]

Anyone exprimented with the style and baffels of the waterbox?

 

[Sandeggo]

Rrp that the baffle was broken loose and flopping around. The welds inside were super cold and basically just tacks. I’m assuming that’s so they don’t mess up the outside of the chamber with penetration. I rewelded it nice and hot since I don’t care about what it looks like behind a gas tank

 

[Harbor]

View attachment 433999
Rrp that the baffle was broken loose and flopping around. The welds inside were super cold and basically just tacks. I’m assuming that’s so they don’t mess up the outside of the chamber with penetration. I rewelded it nice and hot since I don’t care about what it looks like behind a gas tank

Is that RRP box for superjet (b-pipe style) and mounts up front ?

Reason I ask is my (laydown Pipe) RRP box has no baffle

 

[JetManiac]

View attachment 433999
Rrp that the baffle was broken loose and flopping around. The welds inside were super cold and basically just tacks. I’m assuming that’s so they don’t mess up the outside of the chamber with penetration. I rewelded it nice and hot since I don’t care about what it looks like behind a gas tank

The other issue is there is not enough hole area in the rrp sj box baffle which creates extra pressure on the baffle. Recommend using a long bit and drilling so extra holes in it. We did some testing with that waterbox.