Ok I know I shouldn't but here goes, back in 2016 we entered into a deal, I supplied a very nice 300SX hull to him as he was going to make the much anticipated 300SX bolt in kit and need a hull to fit it into , after all he already had the big pump kit for the 440-660 hulls so easy peesy right, the deal was I was supposed to get the hull back with the kit installed after he used it for a while to take to Daytona and such, win win for both of us. weeks go by and Daytona comes up, nothing, months go , nothing by then years go by ,yep you guessed it nothing, always some excuse or it's coming, it's coming, truth was it wasn't even breathing hard..
So during these conversations it comes up hey you don't mind if we cut that hull up some to fit the kit, reluctantly I say yes , then it turns into hey you don't really need that hull back do you , again reluctantly I say ok because I am easygoing like that , well at least till I am not anyway. At least at this point he was still answering phone calls.
So after several years of excuses and BS I text him and say whoa hold up, at this point I need something, anything really, here is what I want, I want a set of lowered 650 mounts and a big pump install kit and a 55SX thru hull bearing , I did receive the parts in a timely fashion however when I open the box I got the cheesy plastic pump support instead of the Aluminum one, the part looked like it would break if I looked at it too hard so not wanting to take any chances I quickly put it back in the box, then after much contemplation I sold off everything except the mounts.
I got another hull and now I am doing what I should have done to start with , fiberglassing a new pump tunnel into the ski just like I did on the first one.
As you can guess the 300SX bolt in kit was never made or manufactured, each time I see people bring it up sometime, I tell them good luck !
