Hey guys, I am having heating issues with my pipe and head. It's too hot when I'm done riding, Called Protec and it's plumbed right, should I take out the restrictor jet on the head pipe? Or should I play around with the water control screw on the head pipe? Thanks guys for any info. By the way it runs awesome it's just way too hot when I am done riding along with the head.
Anyone Else Run a Protec Mach II pipe on superjet?
- Thread starter t11081jetski
- Start date
- Location
- Lakewood, CA
I run the Mach 1 on a blaster. Pull out the water screws and check for plugging. Carbon will build up and plug off the small hole into the chamber. If its like my pipe there will be 2 adjuster screws.
Where exactly is that small hole in the chamber? Thanks man.
- Location
- Lakewood, CA
The head pipe is jacketed so pull out the water screw and its right there. The screw restricts water into the chamber you'll see when you pull it out. You will probably have to pull the pipe out to get to it. The hole is small, I used a small allen wrench and reemed it out.