dirkdiggler
Vendor Account
- Location
- WI
300/440/550 Anyone Need a Mikuni SBN 44 for there kawasaki 550/650/440??
- Thread starter dirkdiggler
- Start date
- Location
- Highland Village TX
I need it!
Wanna lend me the $80 too?
Wanna lend me the $80 too?
dirkdiggler
Vendor Account
- Location
- WI
Dont have $80 to spend on the single best mod for a 550,440,650??....
- Location
- Highland Village TX
Not right now, But I do have a Westcost Intake for the 44 on a 650 if whoever buys the carb needs one!:thewave:
Polish jet pilot
4aces4aces4aces4aces4aces
- Location
- Warsaw, Poland
What is the jetting? Is it jetted for aftermarket performance parts?? e.g. exhaust, head, porting?
- Location
- San Antonio
You need the correct intake manifolf or spacer to bolt it on and I imagine it will have to be jetted for your specs, he is just selling the carb
dirkdiggler
Vendor Account
- Location
- WI
Im not sure on the jetting.....cant remember because I have like Qty 4 SBN 44 carbs laying around with all different jetting. Jets are very cheap anyways! I think you can use a stock 650sx intake with minor modifications!
- Location
- Highland Village TX
The bolt spacing is off by about 1/8" to use it on a stock intake.
44 on a 550 needs a spacer plate or another manifold like a BCW
one a 650 the addapter plate goes on the manifold between the carb and you must bore it out alittle or once again find a manifold. BCW-wescoast-PJS. and the jetting if diffent for both and the jetting is relivent to your mods if you have any more questions i am ussually on my site pwcrider.com. post under ask the Pro's either me or one of my guys can asnwer your questions. i dont come here often so its quicker to post there. thanks
- Location
- CT
Where can I get a throttle plate for a sbn 44 for my 650 sx
Quinc
Buy a Superjet
- Location
- California
- Location
- Pittsburgh Pennsylvania
You have 4? I may want one if you still have them
- Location
- marin county
still have any of these left?