Super Jet Bearing housing bolts missing...

[aknapp11]

are the bolts for the bearing housing a standard size and easily found? after noticing vibration issues i found 2 missing bolts on my bearing housing, and water pouring into the engine compartment... hopefully i can just replace the bolts and it seals right up. any help is appreciated,

Thanks,

Adam

 

[txsuperjetfreak96]

The midshaft housing ? Yamaha or kawi

 

[aknapp11]

07 superjet. and yes midshaft. I haven't checked the bottom bolt to see if it is still there, im almost sure all 3 are gone. I have done very minimal work to my ski, as i am new to owning one. It is sitting in a friends garage at the lake an just looking to see if i can get bolts before heading back up there or if its worth replacing it all if it wont seal again.

 

[txsuperjetfreak96]

I'll check should b m6 or m8. You would probably need to remove clean, put more silicone on and put back on and b good

2013 aquabot from the under water planet Cybertron

 

[txsuperjetfreak96]

I should have extras I could send ya

2013 aquabot from the under water planet Cybertron

 

[aknapp11]

if needed maybe, we have a nicely stocked bolt bin at work i can try first. thanks for the help

 

[txsuperjetfreak96]

No problem

 

[aknapp11]

m8 bolts threaded right in, bolted in easy and sealed up. Nice easy fix. Thanks again man

 

[txsuperjetfreak96]

No problem bro, anytime

2013 aquabot from the under water planet Cybertron