Blaster Best prop for my freestyle blaster?

[nextlevelinnovations]

What prop would be best for freestyle riding with my current setup? Im currently running a fully ported 760, NYNJA pipe, ADA head @ 210psi. I just ordered a hooker 11/17, but not sure if I should have gone with a 9/15. Any suggestions on this setup are appreciated.

 

[stagesrt4]

11/17 should work well

I have a spare 9/15 you can try out if need be... if you like i can sell it to you.

Im swapping over to a 10/16 this weekend... 781 BB

 

[nextlevelinnovations]

Appreciate the offer. How much of a difference do you believe there really is between the two props with my setup?

 

[stagesrt4]

im sure your putting out close to same HP as my setup.. maybe lil less

but your ski is much heavier then mine...

I turn the 9/15 just fine with my current setup but im thinking the 10/16 will be ideal

 

[nextlevelinnovations]

What carbs are you running?

 

[stagesrt4]

OEM 38s

 

[Moto360]

10/16 hooker!

 

[iptamenos]

11/17 hooker will not work well !!! according to impros and my jet 11/17 needs mod engine to work 800++

 

[ProSouth]

11/17 hooker will not work well !!! according to impros and my jet 11/17 needs mod engine to work 800++

Uhhhhh what?

 

[ProSouth]

I'm with stagesrt, I think I'd go around a 10/16 or the 11/17 you have. I have a 735 and I'm wanting to bump up from a 9/15 to the 10/16.
I think you'll be rather close with what you've ordered.

 

[Big Kahuna]

I ran the 10/16 with my LPW 84MM big bore. Worked well (OEM SJ Hull), I am running a 717 now, 10/16 worked well also, but it felt a tad tall.

 

[Quinc]

I talked to skat and they recommend a large hub 13/18 for more bottom end with a little top or a 12/17.

 

[nextlevelinnovations]

I spoke with Impros and they suggested the 10/16. Luckily I was able to exchange the 11/17 and I'm just waiting for the 10/16 to arrive.

 

[ProSouth]

Right on

 

[iptamenos]

if you have pipe , enhancer , ported , flywheel , head . go for 10/16 .
otherwise probably 10/16 will be big!!!!

 

[sneds]

I had a similar setup in my blaster and when I called Impros, David suggested a 10/16 Hooker. He also has a similar Blaster and that's what he runs... Since then, I've changed my setup and I never had the chance to install it, so I can't comment on how well it works.