- Location
- New Jersey
What do you guys recommend since I won’t be going with a pump conversion... skat trak? What pitch? Thanks in advance
Best prop to run with stock pump
- Thread starter Stavissimo
- Start date
- Location
- Saskatchewan
Give impros a call and they'll get you setup
The question appears to be for an FX-1. A Solas 144mm 13/16 will not fit in a stock
FX-1 pump.
SXIPro
JM781 Big Bore
- Location
- Here on the 'X' mostly
Maybe after adding other mods. But out of the box an FX1 has a lot more pop than a RN or a squarenose. And yes, I own all 3.Ah oops missed that! Ahg all good FX1's have been converted though!
17/23, 18/24, 19/25, Solas are pretty much your only options for the stock FX pump. Go 17/23 for surf ,stunts, go 19/25 flat out ,creeks , 18/24 for a little of both. The FX pump really benefits from setting the prop back 3-5mm, unfortunately you MUST modify the stator to do that.
Last edited:
- Location
- New Jersey
thanks for the input so far guys, and i am running an ada girdled head, 35cc domes, ported cylinders, and a true fx1 chamber factory b pipe, that's all for now
Ignition? Probably gonna have to delete rev limiter.
- Location
- New Jersey
yeah i have to find a solution for the cdi and ignition next..
Well you got MSD and them telling you how you put it in wrong because you have no spark. And when the replacement they send you doesn't work they tell you you put that in wrong. On a 61x build I recently did I wound up using a JSP non adjustable rev limit delete (ebay $67), works great for bpipe. Or just spend the loot and go Zeeltronics. If your going Zeeltronics, check out what Zack @ PHP has to offer.
- Location
- New Jersey
I’ve heard a lot about zeeltronics in the past, thought you could only run it with a 760 engine, @PHP is the guy to talk to?
Nope, works on any 701 based motor.
X2 on @powerhouseperformance
Can get just the cdi or a full kit. Much better investment than an Enhancer!
SXIPro
JM781 Big Bore
- Location
- Here on the 'X' mostly
Does the kit come with the flywheel?
