Best Steering Setup for 2010 Superjet

[ryandihno201]

My stock steering sucks. I usually ride bouys and want a tighter steering setup.

2010 stock yamaha superjet
-stock handle pole
-jet dynamics plate and grate

Whats best after market steering setup or mod?

 

[yamanube]

Swap your handpole and steering cable for a pre 2008 superjet setup. The 2008+ steering is poor.

 

[Lumberjack]

Bars and steering may tighten it up but you still don't Get the throw like a pre 08 does without a pole and steering cable swap too. My standard RRP steering on my 07 has been great, I'd recommend it.

 

[JetManiac]

My stock steering sucks. I usually ride bouys and want a tighter steering setup.

2010 stock yamaha superjet
-stock handle pole
-jet dynamics plate and grate

Whats best after market steering setup or mod?

Most important is to swap to longer throw steering cable and modify mounting place on your pole.

 

[ryandihno201]

Most important is to swap to longer throw steering cable and modify mounting place on your pole.

I'd like to do that, instead of quick steer turn plate. Do you have any pictures of one modified?

 

[JetManiac]

I'd like to do that, instead of quick steer turn plate. Do you have any pictures of one modified?

PM sent.

 

[Maxbronze]

Most important is to swap to longer throw steering cable and modify mounting place on your pole.

Hi JetManiac... Could you send me pictures too? Thanks.

 

[john zigler]

To answer the question "what is the best steering mod for a 2010 SJ" it is my opinion as stated above to change out the pole, and steer cable to either a earlier 96-07, or aftermarket RRP, etc.

Personally I do not like just changing the cable to an earlier one, with a different mount bracket. We HAVE done this here and again IMO is a little sketchy, and not something I want to put my name on.

I do have our own quick steer, steering systems. These are short plates, with bearing mount. Doing this and then drilling and moving the cable in at the steering nozzle is a good cost effective, safe mod that works very well.

Here is my steer system;

RCJS Steer System (watcon.com)

I do also have std length plates, if you wanted that type.

Here is a pic of the steer cable bracket you would need to make, and adapt to your 08-later pole to run a 07-earlier cable. Again, It is MY opinion this is not a good idea.......

 

[Quinc]

kp parts sells an adapter at the nozzle that makes the steering more like pre 08.