Blaster 1100 ADA head jetting HELP

[blastertrx]

I have a blaster 1100 with a Yamaha waveraider 1100 motor. Stock Airbox, chokes removed stock pipe and just added an ADA Head with $150 compression. IF stock jetting is:
Main Jet- 107.5 (#1 & #3) 95 (#2)
Pilot Jet- 75

What jetting changes need to be made since adding the the ADA Head?

 

[Big Kahuna]

May not need any. I would start by opening up the screws 1/4 to 1/2 a turn and water testing.

 

[fishman]

I run ADA head and jetting as, 2.0 N/S, 95 spring(Dull Silver), 75 pilots and 115 mains. 1 turn bottoms and 1/2 turn mains.

 

[ryan]

what he said^ the head does not really matter unless you go crazy high compression. you should be running his ^jetting in thr 1st place. the raiders are super lean in stock form already.the next question is where are you? sea level ? fresh water?

 

[blastertrx]

I am at sea level. Why do you run all three jets as the same? The stock jetting has a different main in # 2. Thanks for the help

 

[XJCrawler]

That staggered jetting stock was for a heavy couch hull pulling tubers

 

[ryan]

what he said you still have stock air box on it?
never mind just saw you posted you did .