Blidge Switch mount thru tray?

[vjhardcore]

:scratchchin:Searched and couldn't find the answer I was looking for. I`m going to use a Blowsion dual mount for new attwoods on my new ski for a cleaner install. I haven`t removed the origional plastic cover at the front of the tray to turf and install a switch yet but that aside from that.

I guess I have to remove the electric box inorder to remove the drive shaft cover and install the blowsion bracket.

 

[Idok]

you dont have to remove the Ebox, but it is easier..

 

[#ZERO]

Jet-World has the rotary switches for 28 bucks.

You don't need to remove your e-box to install the bilge bracket.

 

[vjhardcore]

Ok thanks - I take it you have to remove the Ebox to install that switch in the 'firewall'? I like that plastic piece in the tray? Guess it's gotta go to turf right.

:banghead:

 

[Waternut]

Just a thought...Since I always run mine 100% of the time I run the ski, I saw it pointless to have a switch in the tray that I could accidentally flip off. I've got my switch under the hood. Flip it on before I go out and flip it off when I'm done riding. BTW, I've got total loss and haven't had a problem with it killing the battery over the course of a weekend.

 

[hangtime]

It's almost impossible to accidentally switch off the rotary switches .
That's why toggles suck :biggthumpup:

 

[Mark44]

I like the switches that mount to the start stop switch I think JSS sells them.

Mark44

 

[hangtime]

I like the switches that mount to the start stop switch I think JSS sells them.

Mark44

I havent been able to make any of those last more than a season in the saltwater and at $80 a piece that's too much .

 

[Mark44]

I have has mine for 8 years but not in salt.

Mark44

 

[RideItLikeYouStoleIt]

I had one for four years and it died first time in the salt. It was zapping me through the throttle lever.

 

[Waternut]

I like the switches that mount to the start stop switch I think JSS sells them.

Mark44

Don't these only work when the engine is on or that a different kind? I've heard of some that only run the bilge when the engine is on making them completely useless if you get too much water in your ski.

 

[Zerfman34]

i've got the toggle one mounted by throttle...never been a problem on either ski that i've had that on...wait until i get shocked like rideitlikeyoustoleit haha.

 

[The Penguin]

I like the switches that mount to the start stop switch I think JSS sells them.

Mark44

as many times as I whack my knee on the SS switch - I don't need anything else on there to cut/bruise myself.

 

[djkorn1]

Whats a bilge switch... who needs those? Best pump on the market!

http://www.anchorexpress.com/product_detail.cfm?pid=9855