Hi there i bought a 98 superjet with the pole already off and broken so i decided to buy a rrp pole using the stock bracket and stock spring after hours and hours of time wasted trying to put the stock spring in a gave up and convinced myself that the old spring was broken so i bought a blowsion one and the guy on the phone said it would work athough when i got it same problem no idea on how to put this in and the blowsion instructions said "yeah put it in the same way you take out well that dus not help me i have been playing around for hours frustrated to my ends wit i have done many serches with no luck can any1 help me, does any1 have pics they could post of there setups to give me an idea standard or whith rrp pole ,do you have to pre bend these springs ...im so lots and frustrated thanks for any help or pics :banghead::banghead:
blowsion pole spring help on rrp pole
- Thread starter haydo111
- Start date
davidescu_radu
sea riders
- Location
- Constanta,Romania
Well,usually this pole is working well with aftermarket lower brackets!
In any case - the stock spring should be easier to fit! The blowsion is more difficult to fix it in place because is harder!
Try first to assemble the stock broken pole with the blowsion spring and then you will understand how to fix it with RRP
In any case - the stock spring should be easier to fit! The blowsion is more difficult to fix it in place because is harder!
Try first to assemble the stock broken pole with the blowsion spring and then you will understand how to fix it with RRP