BMX Brake trim lever

[mosquini]

Well I was at the bike shop the other day and saw something that looked like it would work really well for a trim system and wondered if anyone was already using this lever. I tried to rotate it but it did not save right but here you go.

 

[WFO Speedracer]

Well I was at the bike shop the other day and saw something that looked like it would work really well for a trim system and wondered if anyone was already using this lever. I tried to rotate it but it did not save right but here you go.

Dayummmmmmmm you could get some throw off of that for sure!!

 

[mosquini]

Thats what I was thinking. that's not bent either thats straight out of the box. I thought that people might want to jump on one of these for some more throw.

 

[Corbearofskiing]

those are the bmx levers my younger brothers rockin, i'll ask him what brand they are when he gets home

check out the Dia-Tech gold finger for a throttle

https://www.jrbicycles.com/storefront/index.php?act=viewProd&productId=558

 

[Corbearofskiing]

https://www.jrbicycles.com/storefront/index.php?act=viewProd&productId=557

another good Dia-tech lever looks like it would work good for trim lever

 

[DAG]

i need to run to the bike shop. how much did that one run you?

alot of people use the tektro levers, but idk which model is the best

 

[mosquini]

that one was on a bike that was for sale, but the lever from tek is around 18 bucks at the shop

 

[WFO Speedracer]

https://www.jrbicycles.com/storefront/index.php?act=viewProd&productId=557

another good Dia-tech lever looks like it would work good for trim lever

The Dirt Harry lever lol I can see it now,this is the 44 magnum trim setup,the biggest trim setup known to man,you can pull backys at will with this trim setup,so let me ask you this punk ,Do you feel lucky,well do ya?:439:

 

[BBYamaha]

Bump an old thread, I just bought a lever like the one above to try out for my trim setup... 20 shipped off fleebay

hope it works alright...

 

[XFT LOU]

I hit up the bike shop after reading this a while ago. I found a nice trim lever w/ lots of pull.

 

[Mark44]

h

I hit up the bike shop after reading this a while ago. I found a nice trim lever w/ lots of pull.

X2 I did the same thing, I think the lever cost me $15.00.

Mark44

 

[SXIPro]

Mark and Lou,

What brand and model did you get? I gotta finish my CATS so I need the lever and the Terry cable.

Thanks!

 

[Watcon]

Another good low priced trim lever

http://www.watcon.com/Catalog_Pages/Trim_Levers.htm

 

[Roo]

http://www.watcon.com/Catalog_Pages/Trim_Levers.htm

What about the trim cable?

Where can I find one that will mate with any of handles listed?

 

[kawyjunki]

What about the trim cable?

Where can I find one that will mate with any of handles listed?

X2)..... I'm at the same point need to get a cable but also a good lever just trying to figure out the best combo with the most available pull/throw

 

[Mark44]

What about the trim cable?

Where can I find one that will mate with any of handles listed?

I drill and tap the trim lever to accept the cable threads.

Our levers are SNAFU c. brake levers $9.58 from airbomb.com

 

[Mark44]

What about the trim cable?

Where can I find one that will mate with any of handles listed?

You can get any kind of ends on the cable housing (#SP435) you want if you have the cable made at Terry Cable.

Mark44

 

[grezzmky]

What about the cable tube...?

 

[Landrose19]

quick question, when you say "trim lever" are you referring to the throttle? because I just bought a ski but was looking into replacing the throttle lever for a BMX brake lever (the Goldfinger)? and is an easy switch?

 

[Cannibal]

quick question, when you say "trim lever" are you referring to the throttle? because I just bought a ski but was looking into replacing the throttle lever for a BMX brake lever (the Goldfinger)? and is an easy switch?

Nope, trim system like this link:

http://x-h2o.com/showthread.php?t=8361